TRIANGULATION_TRIANGLE_NEIGHBORS
Triangle Neighbors
in a Triangulation

TRIANGULATION_TRIANGLE_NEIGHBORS is a C program which computes the three neighboring triangles of each triangle in a triangulation.

The user supplies a node file and a triangle file, containing the coordinates of the nodes, and the indices of the nodes that make up each triangle. Either 3-node or 6-node triangles may be used.

The program reads the data, computes the triangle neighbor information, and writes out the information to a file. In cases where one side of a triangle has no triangle neighbor, a value of -1 is assigned.

The triangle neighbor array is useful if the triangulation has to be searched to find the triangle containing a given point. It is also useful when analyzing the bandwidth of the adjacency matrix, or of a finite element matrix derived from the triangulation.

Usage:

triangulation_triangle_neighbors prefix

• prefix_nodes.txt contains the node coordinates,
• prefix_elements.txt contains the element definitions.
• prefix_element_neighbors.txt will contain the triangle neighbors.

Licensing:

The computer code and data files described and made available on this web page are distributed under the GNU LGPL license.

Languages:

TRIANGULATION_TRIANGLE_NEIGHBORS is available in a C version and a C++ version and a FORTRAN90 version and a MATLAB version.

Related Data and Programs:

MESH_BANDWIDTH, a C++ program which returns the geometric bandwidth associated with a mesh of elements of any order and in a space of arbitrary dimension.

MESH_TO_XML, a C program which reads information defining a 1D, 2D or 3D mesh, namely a file of node coordinates and a file of elements defined by node indices, and creates a corresponding XML file for input to DOLFIN or FENICS.

NEIGHBORS_TO_METIS_GRAPH, a C++ program which reads a triangle mesh neighbor file created by TRIANGULATION_TRIANGLE_NEIGHBORS and writes a modified version of the same data suitable for input to the mesh partitioning program METIS.

RCM, a C++ library which carries out reverse Cuthill-McKee computations.

TABLE_DELAUNAY, a C++ program which triangulates a set of nodes whose coordinates are stored in a file.

TET_MESH_RCM, a FORTRAN90 library which applies the reverse Cuthill-McKee reordering to a tetrahedral mesh of nodes in 3D.

TRIANGLE, a C program which computes a triangulation of a geometric region.

TRIANGULATION, a C library which performs various operations on order 3 (linear) or order 6 (quadratic) triangulations.

TRIANGULATION_BOUNDARY_NODES, a C++ program which reads data defining a triangulation, determines which nodes lie on the boundary, and writes their coordinates to a file.

TRIANGULATION_DISPLAY_OPENGL, a C++ program which reads files defining a triangulation and displays an image using Open GL.

TRIANGULATION_HISTOGRAM, a C++ program which computes histograms of data over a triangulation.

TRIANGULATION_L2Q, a C++ program which reads data defining a 3-node triangulation and generates midside nodes and writes out the corresponding 6-node triangulation.

TRIANGULATION_NODE_TO_ELEMENT, a C program which reads files describing a set of nodes, their triangulation, and the value of one or more quantities at each node, and outputs a file that averages the quantities for each element. This operation in effect creates an "order1" finite element model of the data.

TRIANGULATION_ORDER3, a directory which contains a description and examples of order 3 triangulations.

TRIANGULATION_ORDER6, a directory which contains a description and examples of order 6 triangulations.

TRIANGULATION_ORIENT, a C++ program which reads data defining a triangulation, makes sure that every triangle has positive orientation, and if not, writes a corrected triangle file.

TRIANGULATION_PLOT, a C++ program which reads data defining a triangulation and creates a PostScript image of the nodes and triangles.

TRIANGULATION_Q2L, a C++ program which reads data defining a 6-node triangulation, and subdivides each triangle into 4 3-node triangles, writing the resulting triangulation to a file.

TRIANGULATION_QUAD, a C++ program which estimates the integral of a function over a triangulated region.

TRIANGULATION_QUALITY, a C++ program which reads data defining a triangulation and computes a number of quality measures.

TRIANGULATION_RCM, a C++ program which can reorder the nodes of a triangulation so that the bandwidth of the associated adjacency matrix is reduced.

TRIANGULATION_REFINE, a C++ program which reads data defining a triangulation, replaces each triangle by four congruent smaller ones, and writes the new triangulation information to a file.

TRIANGULATION_SVG, a C program which creates a Scalable Vector Graphics (SVG) image of a triangulation, which can be displayed by a web browser.

TRIG_TO_NEIB, a C program which reads "NODE" and "ELE" files (a format prescribed by triangle) describing a triangulation, and produces a file defining the neighbor triangles of each element; the program can also produce information about the Voronoi diagram. The program is by Lili Ju.

Reference:

1. Marc deBerg, Marc Krevald, Mark Overmars, Otfried Schwarzkopf,
   Computational Geometry,
   Springer, 2000,
   ISBN: 3-540-65620-0.
2. Joseph ORourke,
   Computational Geometry,
   Second Edition,
   Cambridge, 1998,
   ISBN: 0521649765,
   LC: QA448.D38.

Source Code:

• triangulation_triangle_neighbors.c, the source code.

Examples and Tests:

BOX3 is a triangulation of order 3:

• box3_nodes.txt, the node coordinates.
• box3_elements.txt, the triangulation;
• box3.png, a PNG image of the triangulation;
• box3_element_neighbors.txt, the neighbor triangles.

BOX6 is a triangulation of order 6:

• box6_nodes.txt, the node coordinates.
• box6_elements.txt, the triangulation;
• box6.png, a PNG image of the triangulation;
• box6_element_neighbors.txt, the neighbor triangles.

List of Routines:

• MAIN is the main program for TRIANGULATION_TRIANGLE_NEIGHBORS.
• CH_CAP capitalizes a single character.
• CH_EQI is true if two characters are equal, disregarding case.
• CH_TO_DIGIT returns the integer value of a base 10 digit.
• FILE_COLUMN_COUNT counts the columns in the first line of a file.
• FILE_EXIST reports whether a file exists.
• FILE_ROW_COUNT counts the number of row records in a file.
• I4_MAX returns the maximum of two I4's.
• I4_MIN returns the minimum of two I4's.
• I4MAT_DATA_READ reads data from an I4MAT file.
• I4MAT_HEADER_READ reads the header from an I4MAT file.
• I4MAT_TRANSPOSE_PRINT_SOME prints some of an I4MAT, transposed.
• I4MAT_WRITE writes an I4MAT file with no header.
• I4ROW_COMPARE compares two rows of a integer array.
• I4ROW_SORT_A ascending sorts the rows of an I4ROW.
• I4ROW_SWAP swaps two rows of an I4ROW.
• R8MAT_DATA_READ reads the data from an R8MAT file.
• R8MAT_HEADER_READ reads the header from an R8MAT file.
• R8MAT_TRANSPOSE_PRINT_SOME prints some of an R8MAT, transposed.
• S_LEN_TRIM returns the length of a string to the last nonblank.
• S_TO_I4 reads an I4 from a string.
• S_TO_I4VEC reads an I4VEC from a string.
• S_TO_R8 reads an R8 from a string.
• S_TO_R8VEC reads an R8VEC from a string.
• S_WORD_COUNT counts the number of "words" in a string.
• SORT_HEAP_EXTERNAL externally sorts a list of items into ascending order.
• TIMESTAMP prints the current YMDHMS date as a time stamp.
• TRIANGULATION_ORDER3_NEIGHBOR_TRIANGLES determines triangle neighbors.
• TRIANGULATION_ORDER6_NEIGHBOR_TRIANGLES determines triangle neighbors.

You can go up one level to the C source codes.