function triangulation_boundary_nodes ( prefix )

%*****************************************************************************80
%
%% MAIN is the main program for TRIANGULATION_BOUNDARY_NODES.
%
%  Discussion:
%
%    TRIANGULATION_BOUNDARY_NODES outputs boundary nodes of a triangulation.
%
%  Usage:
%
%    triangulation_boundary_nodes ( 'prefix' )
%
%    where
%
%    * 'prefix'_nodes.txt contains the node coordinates;
%    * 'prefix'_elements.txt contains the element definitions.
%    * 'prefix'_boundary_nodes.txt will contain 0 for interior nodes
%      and 1 for each boundary node.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    21 December 2010
%
%  Author:
%
%    John Burkardt
%
  timestamp ( );
  fprintf ( 1, '\n' );
  fprintf ( 1, 'TRIANGULATION_BOUNDARY_NODES\n' );
  fprintf ( 1, '  MATLAB version\n' );
  fprintf ( 1, '  Identify triangulation nodes on the boundary.\n' );
  fprintf ( 1, '\n' );
  fprintf ( 1, '* Read a dataset of NODE_NUM points in 2 dimensions;\n' );
  fprintf ( 1, '\n' );
  fprintf ( 1, '* Read an associated triangulation dataset of  \n' );
  fprintf ( 1, '  triangles using 3 or 6 nodes;\n' );
  fprintf ( 1, '\n' );
  fprintf ( 1, '* Determine which nodes are on the boundary;\n' );
  fprintf ( 1, '\n' );
  fprintf ( 1, '* Write a file which is 1 for each boundary node.\n' );
%
%  The command line argument is the common filename prefix.
%
  if ( nargin < 1 )

    fprintf ( 1, '\n' );
    fprintf ( 1, 'TRIANGULATION_BOUNDARY_NODES:\n' );

    prefix = input ( ...
      'Please enter the filename prefix:' );

  end
%
%  Create the filenames.
%
  node_filename = strcat ( prefix, '_nodes.txt' );
  element_filename = strcat ( prefix, '_elements.txt' );
  boundarynode_filename = strcat ( prefix, '_boundary_nodes.txt' );
%
%  Read the node coordinates.
%
  [ dim_num, node_num ] = r8mat_header_read ( node_filename );

  fprintf ( 1, '\n' );
  fprintf ( 1, '  Read the header of "%s".\n', node_filename );
  fprintf ( 1, '\n' );
  fprintf ( 1, '  Spatial dimension DIM_NUM = %d\n', dim_num );
  fprintf ( 1, '  Number of nodes NODE_NUM  = %d\n', node_num );

  node_xy = r8mat_data_read ( node_filename, dim_num, node_num );

  fprintf ( 1, '\n' );
  fprintf ( 1, '  Read the data in "%s".\n', node_filename );

  r8mat_transpose_print_some ( dim_num, node_num, node_xy, 1, 1, ...
    dim_num, 5, '  Portion of coordinate data from file:' );
%
%  Read the element data.
%
  [ triangle_order, triangle_num ] = i4mat_header_read ( ...
    element_filename );

  fprintf ( 1, '\n' );
  fprintf ( 1, '  Read the header of "%s".\n', ...
    element_filename );
  fprintf ( 1, '\n' );
  fprintf ( 1, '  Triangle order = %d\n', triangle_order );
  fprintf ( 1, '  Number of triangles = %d\n', triangle_num );

  triangle_node = i4mat_data_read ( element_filename, ...
    triangle_order, triangle_num );

  fprintf ( 1, '\n' );
  fprintf ( 1, '  Read the data in "%s".\n', ...
    element_filename );

  i4mat_transpose_print_some ( triangle_order, triangle_num, ...
    triangle_node, 1, 1, triangle_order, 5, ...
    '  Portion of triangle file:' );
%
%  Detect and correct 0-based indexing.
%
  triangle_node = mesh_base_one ( node_num, triangle_order, triangle_num, ...
    triangle_node );
%
%  Determine which nodes lie on the boundary.
%
  if ( triangle_order == 3 )

    node_boundary = triangulation_order3_boundary_node ( node_num, ...
      triangle_num, triangle_node );

  elseif ( triangle_order == 6 )

    node_boundary = triangulation_order6_boundary_node ( node_num, ...
      triangle_num, triangle_node );

  end
%
%  Print the data.
%
  node_boundary_num = 0;

  for node = 1 : node_num
    if ( node_boundary(node) )
      node_boundary_num = node_boundary_num + 1;
    end
  end
  fprintf ( 1, '\n' );
  fprintf ( 1, '  Number of boundary nodes is %d\n', node_boundary_num );

  if ( node_boundary_num < 100 )
    fprintf ( 1, '\n' );
    fprintf ( 1, '  Boundary nodes:\n' );
    fprintf ( 1, '\n' );
    fprintf ( 1, '         #     Index          X               Y\n' );
    fprintf ( 1, '\n' );
    node2 = 0;
    for node = 1 : node_num
      if ( node_boundary(node) )
        node2 = node2 + 1;
        fprintf ( 1, '  %8d  %8d  %14f  %14f\n', ...
          node2, node, node_xy(1:2,node) );
      end
    end
  end
%
%  Write a file containing the boundary node indices.
%
  i4mat_write ( boundarynode_filename, 1, node_num, node_boundary );

  fprintf ( 1, '\n' );
  fprintf ( 1, '  Wrote the node boundary value file "%s".\n', ...
    boundarynode_filename );
%
%  Terminate.
%
  fprintf ( 1, '\n' );
  fprintf ( 1, 'TRIANGULATION_BOUNDARY_NODES\n' );
  fprintf ( 1, '  Normal end of execution.\n' );
  fprintf ( 1, '\n' );
  timestamp ( );

  return
end
function column_num = file_column_count ( input_file_name )

%*****************************************************************************80
%
%% FILE_COLUMN_COUNT counts the columns in the first line of a file.
%
%  Discussion:
%
%    The file is assumed to be a simple text file.
%
%    Most lines of the file are presumed to consist of COLUMN_NUM words,
%    separated by spaces.  There may also be some blank lines, and some
%    comment lines, which have a "#" in column 1.
%
%    The routine tries to find the first non-comment non-blank line and
%    counts the number of words in that line.
%
%    If all lines are blanks or comments, it goes back and tries to analyze
%    a comment line.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    21 February 2004
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, string INPUT_FILE_NAME, the name of the file.
%
%    Output, integer COLUMN_NUM, the number of columns in the file.
%
  FALSE = 0;
  TRUE = 1;
%
%  Open the file.
%
  input_unit = fopen ( input_file_name );

  if ( input_unit < 0 )
    fprintf ( 1, '\n' );
    fprintf ( 1, 'FILE_COLUMN_COUNT - Error!\n' );
    fprintf ( 1, '  Could not open the file "%s".\n', input_file_name );
    error ( 'FILE_COLUMN_COUNT - Error!' );
  end
%
%  Read one line, but skip blank lines and comment lines.
%  Use FGETL so we drop the newline character!
%
  got_one = FALSE;

  while ( 1 )

    line = fgetl ( input_unit );

    if ( line == -1 )
      break;
    end

    if ( s_len_trim ( line ) == 0 )

    elseif ( line(1) == '#' )

    else
      got_one = TRUE;
      break;
    end

  end

  fclose ( input_unit );

  if ( got_one == FALSE )
    fprintf ( 1, '\n' );
    fprintf ( 1, 'FILE_COLUMN_COUNT - Warning!\n' );
    fprintf ( 1, '  The file does not seem to contain any data.\n' );
    column_num = -1;
    return;
  end

  column_num = s_word_count ( line );

  return
end
function row_num = file_row_count ( input_file_name )

%*****************************************************************************80
%
%% FILE_ROW_COUNT counts the number of row records in a file.
%
%  Discussion:
%
%    Each input line is a "RECORD".
%
%    The records are divided into three groups:
%
%    * BLANK LINES (nothing but blanks)
%    * COMMENT LINES (begin with a '#')
%    * DATA RECORDS (anything else)
%
%    The value returned by the function is the number of data records.
%
%    By the way, if the MATLAB routine FGETS is used, instead of
%    FGETL, then the variable LINE will include line termination
%    characters, which means that a blank line would not actually
%    have zero characters.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    31 December 2006
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, string INPUT_FILE_NAME, the name of the input file.
%
%    Output, integer ROW_NUM, the number of rows found.
%
  input_unit = fopen ( input_file_name );

  if ( input_unit < 0 )
    fprintf ( 1, '\n' );
    fprintf ( 1, 'FILE_ROW_COUNT - Error!\n' );
    fprintf ( 1, '  Could not open the file "%s".\n', input_file_name );
    error ( 'FILE_ROW_COUNT - Error!' );
  end

  blank_num = 0;
  comment_num = 0;
  row_num = 0;

  record_num = 0;

  while ( 1 )

    line = fgetl ( input_unit );

    if ( line == -1 )
      break;
    end

    record_num = record_num + 1;
    record_length = s_len_trim ( line );

    if ( record_length <= 0 )
      blank_num = blank_num + 1;
    elseif ( line(1) == '#' )
      comment_num = comment_num + 1;
    else
      row_num = row_num + 1;
    end

  end

  fclose ( input_unit );

  return
end
function table = i4mat_data_read ( input_filename, m, n )

%*****************************************************************************80
%
%% I4MAT_DATA_READ reads data from an I4MAT file.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    27 January 2006
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, string INPUT_FILENAME, the name of the input file.
%
%    Input, integer M, N, the number of rows and columns in the data.
%
%    Output, integer TABLE(M,N), the point coordinates.
%
  table = zeros ( m, n );
%
%  Build up the format string for reading M real numbers.
%
  string = ' ';

  for i = 0 : m
    string = strcat ( string, ' %d' );
  end

  input_unit = fopen ( input_filename );

  if ( input_unit < 0 )
    fprintf ( 1, '\n' );
    fprintf ( 1, 'I4MAT_DATA_READ - Error!\n' );
    fprintf ( 1, '  Could not open the input file.\n' );
    error ( 'I4MAT_DATA_READ - Error!' );
  end

  i = 0;

  while ( i < n )

    line = fgets ( input_unit );

    if ( line == -1 )
      fprintf ( 1, '\n' );
      fprintf ( 1, 'I4MAT_DATA_READ - Error!\n' );
      fprintf ( 1, '  End of input while reading data.\n' );
      error ( 'I4MAT_DATA_READ - Error!' );
    end

    if ( line(1) == '#' )

    elseif ( s_len_trim ( line ) == 0 )

    else

      [ x, count ] = sscanf ( line, string );

      if ( count == m )
        i = i + 1;
        table(1:m,i) = x(1:m);
      end

    end

  end

  fclose ( input_unit );

  return
end
function [ m, n ] = i4mat_header_read ( input_filename )

%*****************************************************************************80
%
%% I4MAT_HEADER_READ reads the header from an I4MAT file.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    22 October 2004
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, string INPUT_FILENAME, the name of the input file.
%
%    Output, integer M, the spatial dimension.
%
%    Output, integer N, the number of points.
%
  m = file_column_count ( input_filename );

  if ( m <= 0 )
    fprintf ( 1, '\n' );
    fprintf ( 1, 'I4MAT_HEADER_READ - Fatal error!\n' );
    fprintf ( 1, '  There was some kind of I/O problem while trying\n' );
    fprintf ( 1, '  to count the number of data columns in\n' );
    fprintf ( 1, '  the file %s.\n', input_filename );
  end

  n = file_row_count ( input_filename );

  if ( n <= 0 )
    fprintf ( 1, '\n' );
    fprintf ( 1, 'I4MAT_HEADER_READ - Fatal error!\n' );
    fprintf ( 1, '  There was some kind of I/O problem while trying\n' );
    fprintf ( 1, '  to count the number of data rows in\n' );
    fprintf ( 1, '  the file %s\n', input_filename );
  end

  return
end
function i4mat_transpose_print_some ( m, n, a, ilo, jlo, ihi, jhi, title )

%*****************************************************************************80
%
%% I4MAT_TRANSPOSE_PRINT_SOME prints some of an I4MAT, transposed.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    21 June 2005
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, integer M, N, the number of rows and columns.
%
%    Input, integer A(M,N), an M by N matrix to be printed.
%
%    Input, integer ILO, JLO, the first row and column to print.
%
%    Input, integer IHI, JHI, the last row and column to print.
%
%    Input, string TITLE, a title.
%
  incx = 10;

  fprintf ( 1, '\n' );
  fprintf ( 1, '%s\n', title );

  for i2lo = max ( ilo, 1 ) : incx : min ( ihi, m )

    i2hi = i2lo + incx - 1;
    i2hi = min ( i2hi, m );
    i2hi = min ( i2hi, ihi );

    inc = i2hi + 1 - i2lo;

    fprintf ( 1, '\n' );
    fprintf ( 1, '  Row: ' );
    for i = i2lo : i2hi
      fprintf ( 1, '%7d  ', i );
    end
    fprintf ( 1, '\n' );
    fprintf ( 1, '  Col\n' );
    fprintf ( 1, '\n' );

    j2lo = max ( jlo, 1 );
    j2hi = min ( jhi, n );

    for j = j2lo : j2hi

      fprintf ( 1, '%5d  ', j );
      for i2 = 1 : inc
        i = i2lo - 1 + i2;
        fprintf ( 1, '%7d  ', a(i,j) );
      end
      fprintf ( 1, '\n' );

    end

  end

  return
end
function i4mat_write ( output_filename, m, n, table )

%*****************************************************************************80
%
%% I4MAT_WRITE writes an I4MAT file.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    09 August 2009
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, string OUTPUT_FILENAME, the output filename.
%
%    Input, integer M, the spatial dimension.
%
%    Input, integer N, the number of points.
%
%    Input, integer TABLE(M,N), the points.
%

%
%  Open the file.
%
  output_unit = fopen ( output_filename, 'wt' );

  if ( output_unit < 0 )
    fprintf ( 1, '\n' );
    fprintf ( 1, 'I4MAT_WRITE - Error!\n' );
    fprintf ( 1, '  Could not open the output file.\n' );
    error ( 'I4MAT_WRITE - Error!' );
  end
%
%  Write the data.
%
  for j = 1 : n
    for i = 1 : m
      fprintf ( output_unit, '  %12d', round ( table(i,j) ) );
    end
    fprintf ( output_unit, '\n' );
  end
%
%  Close the file.
%
  fclose ( output_unit );

  return
end
function lvec_write ( output_filename, n, table )

%*****************************************************************************80
%
%% LVEC_WRITE writes an LVEC file.
%
%  Discussion:
%
%    An LVEC is a vector of L's.
%
%    An L is FALSE if zero, and TRUE if nonzero.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    02 December 2010
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, string OUTPUT_FILENAME, the output file name.
%
%    Input, integer N, the number of points.
%
%    Input, logical TABLE(N), the data.
%

%
%  Open the file.
%
  output_unit = fopen ( output_filename, 'wt' );

  if ( output_unit < 0 )
    fprintf ( 1, '\n' );
    fprintf ( 1, 'LVEC_WRITE - Error!\n' );
    fprintf ( 1, '  Could not open the output file.\n' );
    error ( 'LVEC_WRITE - Error!' );
  end
%
%  Write the data.
%
  for j = 1 : n
    if ( table(j) == 0 )
      fprintf ( output_unit, '0\n' );
    else
      fprintf ( output_unit, '1\n' );
    end
  end
%
%  Close the file.
%
  fclose ( output_unit );

  return
end
function element_node = mesh_base_one ( node_num, element_order, ...
  element_num, element_node )

%*****************************************************************************80
%
%% MESH_BASE_ONE ensures that the element definition is one-based.
%
%  Discussion:
%
%    The ELEMENT_NODE array contains nodes indices that form elements.
%    The convention for node indexing might start at 0 or at 1.
%    Since a MATLAB program will naturally assume a 1-based indexing, it is
%    necessary to check a given element definition and, if it is actually
%    0-based, to convert it.
%
%    This function attempts to detect 0-based node indexing and correct it.
%
%    Thanks to Feifei Xu for pointing out that I was subtracting 1 when I
%    should have been adding 1!  29 November 2012.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    29 November 2012
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, integer NODE_NUM, the number of nodes.
%
%    Input, integer ELEMENT_ORDER, the order of the elements.
%
%    Input, integer ELEMENT_NUM, the number of elements.
%
%    Input/output, integer ELEMENT_NODE(ELEMENT_ORDE,ELEMENT_NUM), the element
%    definitions.
%
  node_min = min ( min ( element_node(1:element_order,1:element_num) ) );
  node_max = max ( max ( element_node(1:element_order,1:element_num) ) );

  if ( node_min == 0 && node_max == node_num - 1 )
    fprintf ( 1, '\n' );
    fprintf ( 1, 'MESH_BASE_ONE:\n' );
    fprintf ( 1, '  The element indexing appears to be 0-based!\n' );
    fprintf ( 1, '  This will be converted to 1-based.\n' );
    element_node(1:element_order,1:element_num) = ...
      element_node(1:element_order,1:element_num) + 1;
  elseif ( node_min == 1 && node_max == node_num )
    fprintf ( 1, '\n' );
    fprintf ( 1, 'MESH_BASE_ONE:\n' );
    fprintf ( 1, '  The element indexing appears to be 1-based!\n' );
    fprintf ( 1, '  No conversion is necessary.\n' );
  else
    fprintf ( 1, '\n' );
    fprintf ( 1, 'MESH_BASE_ONE - Warning!\n' );
    fprintf ( 1, '  The element indexing is not of a recognized type.\n' );
    fprintf ( 1, '  NODE_MIN = %d\n', node_min );
    fprintf ( 1, '  NODE_MAX = %d\n', node_max );
    fprintf ( 1, '  NODE_NUM = %d\n', node_num );
  end

  return
end
function table = r8mat_data_read ( input_filename, m, n )

%*****************************************************************************80
%
%% R8MAT_DATA_READ reads data from an R8MAT file.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    27 January 2006
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, string INPUT_FILENAME, the name of the input file.
%
%    Input, integer M, N, the number of rows and columns of data.
%
%    Output, real TABLE(M,N), the point coordinates.
%
  table = zeros ( m, n );
%
%  Build up the format string for reading M real numbers.
%
  string = ' ';

  for i = 0 : m
    string = strcat ( string, ' %f' );
  end

  input_unit = fopen ( input_filename );

  if ( input_unit < 0 )
    fprintf ( 1, '\n' );
    fprintf ( 1, 'R8MAT_DATA_READ - Error!\n' );
    fprintf ( 1, '  Could not open the file.\n' );
    error ( 'R8MAT_DATA_READ - Error!' );
  end

  i = 0;

  while ( i < n )

    line = fgets ( input_unit );

    if ( line == -1 )
      break;
    end

    if ( line(1) == '#' )

    elseif ( s_len_trim ( line ) == 0 )

    else

      [ x, count ] = sscanf ( line, string );

      if ( count == m )
        i = i + 1;
        table(1:m,i) = x(1:m);
      end

    end

  end

  fclose ( input_unit );

  return
end
function [ m, n ] = r8mat_header_read ( input_filename )

%*****************************************************************************80
%
%% R8MAT_HEADER_READ reads the header from an R8MAT file.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    22 October 2004
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, string INPUT_FILENAME, the name of the input file.
%
%    Output, integer M, the spatial dimension.
%
%    Output, integer N, the number of points.
%
  m = file_column_count ( input_filename );

  if ( m <= 0 )
    fprintf ( 1, '\n' );
    fprintf ( 1, 'R8MAT_HEADER_READ - Fatal error!\n' );
    fprintf ( 1, '  There was some kind of I/O problem while trying\n' );
    fprintf ( 1, '  to count the number of data columns in\n' );
    fprintf ( 1, '  the file %s.\n', input_filename );
  end

  n = file_row_count ( input_filename );

  if ( n <= 0 )
    fprintf ( 1, '\n' );
    fprintf ( 1, 'R8MAT_HEADER_READ - Fatal error!\n' );
    fprintf ( 1, '  There was some kind of I/O problem while trying\n' );
    fprintf ( 1, '  to count the number of data rows in\n' );
    fprintf ( 1, '  the file %s\n', input_filename );
  end

  return
end
function r8mat_transpose_print_some ( m, n, a, ilo, jlo, ihi, jhi, title )

%*****************************************************************************80
%
%% R8MAT_TRANSPOSE_PRINT_SOME prints some of an R8MAT, transposed.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    23 May 2005
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, integer M, N, the number of rows and columns.
%
%    Input, real A(M,N), an M by N matrix to be printed.
%
%    Input, integer ILO, JLO, the first row and column to print.
%
%    Input, integer IHI, JHI, the last row and column to print.
%
%    Input, string TITLE, a title.
%
  incx = 5;

  fprintf ( 1, '\n' );
  fprintf ( 1, '%s\n', title );

  for i2lo = max ( ilo, 1 ) : incx : min ( ihi, m )

    i2hi = i2lo + incx - 1;
    i2hi = min ( i2hi, m );
    i2hi = min ( i2hi, ihi );

    inc = i2hi + 1 - i2lo;

    fprintf ( 1, '\n' );
    fprintf ( 1, '  Row: ' );
    for i = i2lo : i2hi
      fprintf ( 1, '%7d       ', i );
    end
    fprintf ( 1, '\n' );
    fprintf ( 1, '  Col\n' );

    j2lo = max ( jlo, 1 );
    j2hi = min ( jhi, n );

    for j = j2lo : j2hi

      fprintf ( 1, '%5d ', j );
      for i2 = 1 : inc
        i = i2lo - 1 + i2;
        fprintf ( 1, '%12f', a(i,j) );
      end
      fprintf ( 1, '\n' );

    end

  end

  return
end
function r8mat_write ( output_filename, m, n, table )

%*****************************************************************************80
%
%% R8MAT_WRITE writes an R8MAT file.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    09 August 2009
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, string OUTPUT_FILENAME, the output filename.
%
%    Input, integer M, the spatial dimension.
%
%    Input, integer N, the number of points.
%
%    Input, real TABLE(M,N), the points.
%

%
%  Open the file.
%
  output_unit = fopen ( output_filename, 'wt' );

  if ( output_unit < 0 )
    fprintf ( 1, '\n' );
    fprintf ( 1, 'R8MAT_WRITE - Error!\n' );
    fprintf ( 1, '  Could not open the output file.\n' );
    error ( 'R8MAT_WRITE - Error!' );
  end
%
%  Write the data.
%
%  For greater precision, try:
%
%     fprintf ( output_unit, '  %24,16f', table(i,j) );
%
  for j = 1 : n
    for i = 1 : m
      fprintf ( output_unit, '  %14f', table(i,j) );
    end
    fprintf ( output_unit, '\n' );
  end
%
%  Close the file.
%
  fclose ( output_unit );

  return
end
function len = s_len_trim ( s )

%*****************************************************************************80
%
%% S_LEN_TRIM returns the length of a character string to the last nonblank.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    14 June 2003
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, string S, the string to be measured.
%
%    Output, integer LEN, the length of the string up to the last nonblank.
%
  len = length ( s );

  while ( 0 < len )
    if ( s(len) ~= ' ' )
      return
    end
    len = len - 1;
  end

  return
end
function word_num = s_word_count ( s )

%*****************************************************************************80
%
%% S_WORD_COUNT counts the number of "words" in a string.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    30 January 2006
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, string S, the string to be examined.
%
%    Output, integer WORD_NUM, the number of "words" in the string.
%    Words are presumed to be separated by one or more blanks.
%
  FALSE = 0;
  TRUE = 1;

  word_num = 0;
  s_length = length ( s );

  if ( s_length <= 0 )
    return;
  end

  blank = TRUE;

  for i = 1 : s_length

    if ( s(i) == ' ' )
      blank = TRUE;
    elseif ( blank == TRUE )
      word_num = word_num + 1;
      blank = FALSE;
    end

  end

  return
end
function timestamp ( )

%*****************************************************************************80
%
%% TIMESTAMP prints the current YMDHMS date as a timestamp.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    14 February 2003
%
%  Author:
%
%    John Burkardt
%
  t = now;
  c = datevec ( t );
  s = datestr ( c, 0 );
  fprintf ( 1, '%s\n', s );

  return
end
function node_boundary = triangulation_order3_boundary_node ( node_num, ...
  triangle_num, triangle_node )

%*****************************************************************************80
%
%% TRIANGULATION_ORDER3_BOUNDARY_NODE indicates which nodes are on the boundary.
%
%  Discussion:
%
%    This routine is given a triangulation, an abstract list of triples
%    of nodes.  It is assumed that the nodes in each triangle are listed
%    in a counterclockwise order, although the routine should work
%    if the nodes are consistently listed in a clockwise order as well.
%
%    It is assumed that each edge of the triangulation is either
%    * an INTERIOR edge, which is listed twice, once with positive
%      orientation and once with negative orientation, or;
%    * a BOUNDARY edge, which will occur only once.
%
%    This routine should work even if the region has holes - as long
%    as the boundary of the hole comprises more than 3 edges!
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    02 December 2010
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, integer NODE_NUM, the number of nodes.
%
%    Input, integer TRIANGLE_NUM, the number of triangles.
%
%    Input, integer TRIANGLE_NODE(3,TRIANGLE_NUM), the nodes that make up the
%    triangles.  These should be listed in counterclockwise order.
%
%    Output, logical NODE_BOUNDARY(NODE_NUM), is TRUE if the node
%    is on a boundary edge.
%
  m = 2;
  n = 3 * triangle_num;
%
%  Set up the edge array.
%
  edge(1:2,               1:  triangle_num) = triangle_node(1:2,1:triangle_num);
  edge(1:2,  triangle_num+1:2*triangle_num) = triangle_node(2:3,1:triangle_num);
  edge(1,  2*triangle_num+1:3*triangle_num) = triangle_node(3,  1:triangle_num);
  edge(2,  2*triangle_num+1:3*triangle_num) = triangle_node(1,  1:triangle_num);
%
%  In each column, force the smaller entry to appear first.
%
  e1(1:n) = min ( edge(1:2,1:n) );
  e2(1:n) = max ( edge(1:2,1:n) );

  edge(1,1:n) = e1(1:n);
  edge(2,1:n) = e2(1:n);
%
%  Ascending sort the column array.
%
  edge = ( sortrows ( edge' ) )';
%
%  Records which appear twice are internal edges and can be ignored.
%
  node_boundary(1:node_num) = 0;

  j = 0;

  while ( j < 3 * triangle_num )

    j = j + 1;

    if ( j == 3 * triangle_num )
      node_boundary(edge(1:m,j)) = 1;
    elseif ( all ( edge(1:m,j) == edge(1:m,j+1) ) )
      j = j + 1;
    else
      node_boundary(edge(1:m,j)) = 1;
    end

  end

  return
end
function node_boundary = triangulation_order6_boundary_node ( node_num, ...
  triangle_num, triangle_node )

%*****************************************************************************80
%
%% TRIANGULATION_ORDER6_BOUNDARY_NODE indicates which nodes are on the boundary.
%
%  Discussion:
%
%    This routine is given an order 6 triangulation, an abstract list of sets
%    of six nodes.  The vertices are listed clockwise, then the
%    midside nodes.
%
%    It is assumed that each edge of the triangulation is either
%    * an INTERIOR edge, which is listed twice, once with positive
%      orientation and once with negative orientation, or;
%    * a BOUNDARY edge, which will occur only once.
%
%    This routine should work even if the region has holes - as long
%    as the boundary of the hole comprises more than 3 edges!
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    02 December 2010
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, integer NODE_NUM, the number of nodes.
%
%    Input, integer TRIANGLE_NUM, the number of triangles.
%
%    Input, integer TRIANGLE_NODE(6,TRIANGLE_NUM), the nodes that make up the
%    triangles.
%
%    Output, logical NODE_BOUNDARY(NODE_NUM), is TRUE if the node
%    is on a boundary edge.
%
  m = 3;
  n = 3 * triangle_num;
%
%  Set up the edge array.  The midside node is listed last, as
%  it is not needed for the sorting process.
%
  edge(1,               1:  triangle_num) = triangle_node(1,1:triangle_num);
  edge(2,               1:  triangle_num) = triangle_node(4,1:triangle_num);
  edge(3,               1:  triangle_num) = triangle_node(2,1:triangle_num);

  edge(1,  triangle_num+1:2*triangle_num) = triangle_node(2,1:triangle_num);
  edge(2,  triangle_num+1:2*triangle_num) = triangle_node(5,1:triangle_num);
  edge(3,  triangle_num+1:2*triangle_num) = triangle_node(3,1:triangle_num);

  edge(1,2*triangle_num+1:3*triangle_num) = triangle_node(3,1:triangle_num);
  edge(2,2*triangle_num+1:3*triangle_num) = triangle_node(6,1:triangle_num);
  edge(3,2*triangle_num+1:3*triangle_num) = triangle_node(1,1:triangle_num);
%
%  In each column, force the smaller of the two vertices to appear first.
%
  e1(1:n) = min ( edge(1:2:3,1:n) );
  e2(1:n) = max ( edge(1:2:3,1:n) );

  edge(1,1:n) = e1(1:n);
  edge(3,1:n) = e2(1:n);
%
%  Ascending sort the column array.
%
  edge = ( sortrows ( edge' ) )';
%
%  Records which appear twice are internal edges and can be ignored.
%
  node_boundary(1:node_num) = 0;

  i = 0;

  while ( i < 3 * triangle_num )

    i = i + 1;

    if ( i == 3 * triangle_num )
      node_boundary(edge(1:m,i)) = 1;
    elseif ( all ( edge(1:m,i) == edge(1:m,i+1) ) )
      i = i + 1;
    else
      node_boundary(edge(1:m,i)) = 1;
    end

  end

  return
end
