function histogram_display ( input_file_name )

%*****************************************************************************80
%
%% HISTOGRAM_DISPLAY makes a stacked bar plot of a set of histogrammed data.
%
%  Discussion:
%
%    The input data is a single file, whose first column is taken as a set of
%    average X values.
%
%    Each subsequent column is taken as the corresponding Y coordinates of
%    a histogram.  All the columns are plotted together as a stacked bar plot.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    08 November 2005
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, string INPUT_FILE_NAME, the name of the input data file.
%
%  Local parameters:
%
%    Local, integer M, the number of columns of data.
%
%    Local, integer N, the number of entries in each column.
%
%    Local, real Z(NDIM,N), the set of data.
%
  fprintf ( 1, '\n' );
  timestamp ( );

  fprintf ( 1, '\n' );
  fprintf ( 1, 'HISTOGRAM_DISPLAY:\n' );
  fprintf ( 1, '  MATLAB version:\n' );
  fprintf ( 1, '\n' );
  fprintf ( 1, '  Read columns of data, assuming column 1 is the.\n' );
  fprintf ( 1, '  (average) X value, the other columns are histograms.\n' );
  fprintf ( 1, '  Display a stacked histogram of all the data.\n' );

  if ( nargin < 1 )
    fprintf ( 1, '\n' );
    input_file_name = input ( 'Enter the name of the input file.' );
  end

  [ m, n ] = r8mat_header_read ( input_file_name );
%
%  M had better be at least 2!
%
  if ( m < 2 )
    fprintf ( 1, '\n' );
    fprintf ( 1, 'HISTOGRAM_DISPLAY - Fatal error!\n' );
    fprintf ( 1, '  The number of columns of data must be at least 2!\n' );
    error ( 'HISTOGRAM_DISPLAY - Fatal error!' );
  end
% 
%  Read the point set.
%
  z = r8mat_data_read ( input_file_name, m, n );
  z = z';
%
%  Assume that column 1 is the (average) X coordinate, and that all other columns
%  are sets of Y coordinates.  Plot the Y values as stacked bars.
%
  title ( input_file_name );

  bar3 ( z(:,1), z(:,2:m), 'stacked' );
%
%  Terminate.
%
  fprintf ( 1, '\n' );
  fprintf ( 1, 'HISTOGRAM_DISPLAY:\n' );
  fprintf ( 1, '  Normal end of execution.\n' );

  fprintf ( 1, '\n' );
  timestamp ( );

  return
end
function column_num = file_column_count ( input_file_name )

%*****************************************************************************80
%
%% FILE_COLUMN_COUNT counts the columns in the first line of a file.
%
%  Discussion:
%
%    The file is assumed to be a simple text file.
%
%    Most lines of the file are presumed to consist of COLUMN_NUM words,
%    separated by spaces.  There may also be some blank lines, and some 
%    comment lines, which have a "#" in column 1.
%
%    The routine tries to find the first non-comment non-blank line and
%    counts the number of words in that line.
%
%    If all lines are blanks or comments, it goes back and tries to analyze
%    a comment line.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license. 
%
%  Modified:
%
%    21 February 2004
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, string INPUT_FILE_NAME, the name of the file.
%
%    Output, integer COLUMN_NUM, the number of columns in the file.
%
  FALSE = 0;
  TRUE = 1;
%
%  Open the file.
%
  input_unit = fopen ( input_file_name );

  if ( input_unit < 0 ) 
    fprintf ( 1, '\n' );
    fprintf ( 1, 'FILE_COLUMN_COUNT - Error!\n' );
    fprintf ( 1, '  Could not open the file "%s".\n', input_file_name );
    error ( 'FILE_COLUMN_COUNT - Error!' );
    column_num = -1;
    return;
  end
%
%  Read one line, but skip blank lines and comment lines.
%  Use FGETL so we drop the newline character!
%
  got_one = FALSE;

  while ( 1 )

    line = fgetl ( input_unit );

    if ( line == -1 )
      break;
    end

    if ( s_len_trim ( line ) == 0 )

    elseif ( line(1) == '#' )

    else
      got_one = TRUE;
      break;
    end

  end

  fclose ( input_unit );

  if ( got_one == FALSE ) 
    fprintf ( 1, '\n' );
    fprintf ( 1, 'FILE_COLUMN_COUNT - Warning!\n' );
    fprintf ( 1, '  The file does not seem to contain any data.\n' );
    column_num = -1;
    return;
  end

  column_num = s_word_count ( line );

  return
end
function row_num = file_row_count ( input_file_name )

%*****************************************************************************80
%
%% FILE_ROW_COUNT counts the number of row records in a file.
%
%  Discussion:
%
%    Each input line is a "RECORD".
%
%    The records are divided into three groups:
%    
%    * BLANK LINES (nothing but blanks)
%    * COMMENT LINES (begin with a '#')
%    * DATA RECORDS (anything else)
%
%    The value returned by the function is the number of data records.
%
%    By the way, if the MATLAB routine FGETS is used, instead of
%    FGETL, then the variable LINE will include line termination 
%    characters, which means that a blank line would not actually
%    have zero characters.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license. 
%
%  Modified:
%
%    31 December 2006
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, string INPUT_FILE_NAME, the name of the input file.
%
%    Output, integer ROW_NUM, the number of rows found. 
%
  input_unit = fopen ( input_file_name );

  if ( input_unit < 0 ) 
    fprintf ( 1, '\n' );
    fprintf ( 1, 'FILE_ROW_COUNT - Error!\n' );
    fprintf ( 1, '  Could not open the file "%s".\n', input_file_name );
    error ( 'FILE_ROW_COUNT - Error!' );
    row_num = -1;
    return;
  end

  blank_num = 0;
  comment_num = 0;
  row_num = 0;
  
  record_num = 0;

  while ( 1 )

    line = fgetl ( input_unit );

    if ( line == -1 )
      break;
    end

    record_num = record_num + 1;
    record_length = s_len_trim ( line );
    
    if ( record_length <= 0 )
      blank_num = blank_num + 1;
    elseif ( line(1) == '#' )
      comment_num = comment_num + 1;
    else
      row_num = row_num + 1;
    end

  end

  fclose ( input_unit );

  return
end
function table = r8mat_data_read ( input_filename, m, n )

%*****************************************************************************80
%
%% R8MAT_DATA_READ reads data from an R8MAT file.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    27 January 2006
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, string INPUT_FILENAME, the name of the input file.
%
%    Input, integer M, N, the number of rows and columns of data.
%
%    Output, real TABLE(M,N), the point coordinates.
%
  table = [];
%
%  Build up the format string for reading M real numbers.
%
  string = ' ';

  for i = 0 : m
    string = strcat ( string, ' %f' );
  end

  input_unit = fopen ( input_filename );

  if ( input_unit < 0 ) 
    fprintf ( 1, '\n' );
    fprintf ( 1, 'R8MAT_DATA_READ - Error!\n' );
    fprintf ( 1, '  Could not open the file.\n' );
    error ( 'R8MAT_DATA_READ - Error!' );
    return;
  end

  i = 0;

  while ( i < n )

    line = fgets ( input_unit );

    if ( line == -1 )
      break;
    end

    if ( line(1) == '#' )

    elseif ( s_len_trim ( line ) == 0 )
      
    else

      [ x, count ] = sscanf ( line, string );

      if ( count == m )
        i = i + 1;
        table(1:m,i) = x(1:m);
      end

    end

  end

  fclose ( input_unit );

  return
end
function [ m, n ] = r8mat_header_read ( input_filename )

%*****************************************************************************80
%
%% R8MAT_HEADER_READ reads the header from an R8MAT file.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    22 October 2004
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, string INPUT_FILENAME, the name of the input file.
%
%    Output, integer M, the spatial dimension.
%
%    Output, integer N, the number of points.
%
  m = file_column_count ( input_filename );

  if ( m <= 0 )
    fprintf ( 1, '\n' );
    fprintf ( 1, 'R8MAT_HEADER_READ - Fatal error!\n' );
    fprintf ( 1, '  There was some kind of I/O problem while trying\n' );
    fprintf ( 1, '  to count the number of data columns in\n' );
    fprintf ( 1, '  the file %s.\n', input_filename );
  end

  n = file_row_count ( input_filename );

  if ( n <= 0 )
    fprintf ( 1, '\n' );
    fprintf ( 1, 'R8MAT_HEADER_READ - Fatal error!\n' );
    fprintf ( 1, '  There was some kind of I/O problem while trying\n' );
    fprintf ( 1, '  to count the number of data rows in\n' );
    fprintf ( 1, '  the file %s\n', input_filename );
  end

  return
end
function len = s_len_trim ( s )

%*****************************************************************************80
%
%% S_LEN_TRIM returns the length of a character string to the last nonblank.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    14 June 2003
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, string S, the string to be measured.
%
%    Output, integer LEN, the length of the string up to the last nonblank.
%
  len = length ( s );

  while ( 0 < len )
    if ( s(len) ~= ' ' )
      return
    end
    len = len - 1;
  end

  return
end
function word_num = s_word_count ( s )

%*****************************************************************************80
%
%% S_WORD_COUNT counts the number of "words" in a string.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    30 January 2006
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, string S, the string to be examined.
%
%    Output, integer WORD_NUM, the number of "words" in the string.
%    Words are presumed to be separated by one or more blanks.
%
  FALSE = 0;
  TRUE = 1;

  word_num = 0;
  s_length = length ( s );

  if ( s_length <= 0 )
    return;
  end

  blank = TRUE;

  for i = 1 : s_length

    if ( s(i) == ' ' )
      blank = TRUE;
    elseif ( blank == TRUE )
      word_num = word_num + 1;
      blank = FALSE;
    end

  end

  return
end
function timestamp ( )

%*****************************************************************************80
%
%% TIMESTAMP prints the current YMDHMS date as a timestamp.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    14 February 2003
%
%  Author:
%
%    John Burkardt
%
  t = now;
  c = datevec ( t );
  s = datestr ( c, 0 );
  fprintf ( 1, '%s\n', s );

  return
end
