function fem_to_triangle ( prefix )

%*****************************************************************************80
%
%% MAIN is the main program for FEM_TO_TRIANGLE.
%
%  Discussion:
%
%    FEM_TO_TRIANGLE converts a mesh of triangles from FEM to TRIANGLE format.
%
%  Usage:
%
%    fem_to_triangle ( 'prefix' )
%
%    where 'prefix' is the common filename prefix:
%
%    * 'prefix'_nodes.txt contains the FEM node coordinates,
%    * 'prefix'_elements.txt contains the FEM element connectivities.
%    * 'prefix'.node will contains the TRIANGLE node coordinates,
%    * 'prefix'.ele will contains the TRIANGLE element connectivities.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    14 October 2014
%
%  Author:
%
%    John Burkardt
%
  timestamp ( );

  fprintf ( 1, '\n' );
  fprintf ( 1, 'FEM_TO_TRIANGLE\n' );
  fprintf ( 1, '  MATLAB version\n' );
  fprintf ( 1, ...
    '  Convert a 2D mesh of triangles from FEM to TRIANGLE format.\n' );
  fprintf ( 1, '\n' );
  fprintf ( 1, '  Read:\n' );
  fprintf ( 1, '  * "prefix"_nodes.txt, FEM node coordinates.\n' );
  fprintf ( 1, '  * "prefix"_elements.txt, FEM element connectivity.\n' );
  fprintf ( 1, '  Create:\n' );
  fprintf ( 1, '  * "prefix.node, TRIANGLE node coordinates.\n' );
  fprintf ( 1, '  * "prefix".ele, TRIANGLE element connectivity.\n' );
%
%  The command line argument is the common filename prefix.
%
  if ( nargin < 1 )

    fprintf ( 1, '\n' );
    fprintf ( 1, 'FEM_TO_TRIANGLE:\n' );

    prefix = input ( ...
      'Please enter the filename prefix:' );

  end
%
%  Create the filenames.
%
  fem_node_filename = strcat ( prefix, '_nodes.txt' );
  fem_element_filename = strcat ( prefix, '_elements.txt' );
  triangle_node_filename = strcat ( prefix, '.node' );
  triangle_element_filename = strcat ( prefix, '.ele' );
%
%  Read the data.
%
  [ m, node_num ] = r8mat_header_read ( fem_node_filename );

  fprintf ( 1, '\n' );
  fprintf ( 1, '  Read the header of "%s".\n', fem_node_filename );
  fprintf ( 1, '\n' );
  fprintf ( 1, '  Spatial dimension = %d\n', m );
  fprintf ( 1, '  Number of points  = %d\n', node_num );

  if ( m ~= 2 )

    fprintf ( 1, '\n' );
    fprintf ( 1, 'FEM_TO_TRIANGLE - Fatal error!\n' );
    fprintf ( 1, '  Mesh data is not 2 dimensional.\n' );
    error ( 'FEM_TO_TRIANGLE - Fatal error!' );

  end

  node_x(1:m,1:node_num) = r8mat_data_read ( fem_node_filename, ...
    m, node_num );

  fprintf ( 1, '\n' );
  fprintf ( 1, '  Read the data in "%s".\n', fem_node_filename );

  r8mat_transpose_print_some ( m, node_num, node_x, 1, 1, m, 5, ...
    '  Initial portion of node coordinate data:' );
%
%  Read the element data.
%
  [ element_order, element_num ] = i4mat_header_read ( fem_element_filename );

  if ( element_order ~= 3 )

    fprintf ( 1, '\n' );
    fprintf ( 1, 'FEM_TO_TRIANGLE - Fatal error!\n' );
    fprintf ( 1, '  Elements are not 3-node triangles.\n' );
    error ( 'FEM_TO_TRIANGLE - Fatal error!' );

  end

  fprintf ( 1, '\n' );
  fprintf ( 1, '  Read the header of ""%s".\n', fem_element_filename );
  fprintf ( 1, '\n' );
  fprintf ( 1, '  Element order = %d\n', element_order );
  fprintf ( 1, '  Number of elements  = %d\n', element_num );

  element_node(1:element_order,1:element_num) = i4mat_data_read ( ...
    fem_element_filename, element_order, element_num );

  fprintf ( 1, '\n' );
  fprintf ( 1, '  Read the data in ""%s".\n', fem_element_filename );

  i4mat_transpose_print_some ( element_order, element_num, element_node, ...
    1, 1, element_order, 10, '  Initial portion of element data:' );
%
%  Enforce 1-based indexing.
%
  element_node = mesh_base_one ( node_num, element_order, element_num, ...
    element_node );
%
%  Write the TRIANGLE node and element files.
%
  node_att_num = 0;
  node_att = [];
  node_marker_num = 0;
  node_marker = [];

  triangle_node_write ( triangle_node_filename, node_num, m, ...
    node_att_num, node_marker_num, node_x, node_att, node_marker );

  fprintf ( 1, '\n' );
  fprintf ( 1, '  Created "%s"\n', triangle_node_filename );

  element_att_num = 0;
  element_att = [];

  triangle_element_write ( triangle_element_filename, element_num, ...
    element_order, element_att_num, element_node, element_att );

  fprintf ( 1, '  Created "%s"\n', triangle_element_filename );
%
%  Terminate.
%
  fprintf ( 1, '\n' );
  fprintf ( 1, 'FEM_TO_TRIANGLE\n' );
  fprintf ( 1, '  Normal end of execution.\n' );
  fprintf ( 1, '\n' );
  timestamp ( );

  return
end
function column_num = file_column_count ( input_file_name )

%*****************************************************************************80
%
%% FILE_COLUMN_COUNT counts the columns in the first line of a file.
%
%  Discussion:
%
%    The file is assumed to be a simple text file.
%
%    Most lines of the file are presumed to consist of COLUMN_NUM words,
%    separated by spaces.  There may also be some blank lines, and some 
%    comment lines, which have a "#" in column 1.
%
%    The routine tries to find the first non-comment non-blank line and
%    counts the number of words in that line.
%
%    If all lines are blanks or comments, it goes back and tries to analyze
%    a comment line.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license. 
%
%  Modified:
%
%    21 February 2004
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, string INPUT_FILE_NAME, the name of the file.
%
%    Output, integer COLUMN_NUM, the number of columns in the file.
%
  FALSE = 0;
  TRUE = 1;
%
%  Open the file.
%
  input_unit = fopen ( input_file_name );

  if ( input_unit < 0 ) 
    fprintf ( 1, '\n' );
    fprintf ( 1, 'FILE_COLUMN_COUNT - Error!\n' );
    fprintf ( 1, '  Could not open the file "%s".\n', input_file_name );
    error ( 'FILE_COLUMN_COUNT - Error!' );
  end
%
%  Read one line, but skip blank lines and comment lines.
%  Use FGETL so we drop the newline character!
%
  got_one = FALSE;

  while ( 1 )

    line = fgetl ( input_unit );

    if ( line == -1 )
      break;
    end

    if ( s_len_trim ( line ) == 0 )

    elseif ( line(1) == '#' )

    else
      got_one = TRUE;
      break;
    end

  end

  fclose ( input_unit );

  if ( got_one == FALSE ) 
    fprintf ( 1, '\n' );
    fprintf ( 1, 'FILE_COLUMN_COUNT - Warning!\n' );
    fprintf ( 1, '  The file does not seem to contain any data.\n' );
    column_num = -1;
    return;
  end

  column_num = s_word_count ( line );

  return
end
function row_num = file_row_count ( input_file_name )

%*****************************************************************************80
%
%% FILE_ROW_COUNT counts the number of row records in a file.
%
%  Discussion:
%
%    Each input line is a "RECORD".
%
%    The records are divided into three groups:
%    
%    * BLANK LINES (nothing but blanks)
%    * COMMENT LINES (begin with a '#')
%    * DATA RECORDS (anything else)
%
%    The value returned by the function is the number of data records.
%
%    By the way, if the MATLAB routine FGETS is used, instead of
%    FGETL, then the variable LINE will include line termination 
%    characters, which means that a blank line would not actually
%    have zero characters.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license. 
%
%  Modified:
%
%    31 December 2006
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, string INPUT_FILE_NAME, the name of the input file.
%
%    Output, integer ROW_NUM, the number of rows found. 
%
  input_unit = fopen ( input_file_name );

  if ( input_unit < 0 ) 
    fprintf ( 1, '\n' );
    fprintf ( 1, 'FILE_ROW_COUNT - Error!\n' );
    fprintf ( 1, '  Could not open the file "%s".\n', input_file_name );
    error ( 'FILE_ROW_COUNT - Error!' );
  end

  blank_num = 0;
  comment_num = 0;
  row_num = 0;
  
  record_num = 0;

  while ( 1 )

    line = fgetl ( input_unit );

    if ( line == -1 )
      break;
    end

    record_num = record_num + 1;
    record_length = s_len_trim ( line );
    
    if ( record_length <= 0 )
      blank_num = blank_num + 1;
    elseif ( line(1) == '#' )
      comment_num = comment_num + 1;
    else
      row_num = row_num + 1;
    end

  end

  fclose ( input_unit );

  return
end
function table = i4mat_data_read ( input_filename, m, n )

%*****************************************************************************80
%
%% I4MAT_DATA_READ reads data from an I4MAT file.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    27 January 2006
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, string INPUT_FILENAME, the name of the input file.
%
%    Input, integer M, N, the number of rows and columns in the data.
%
%    Output, integer TABLE(M,N), the point coordinates.
%
  table = zeros ( m, n );
%
%  Build up the format string for reading M real numbers.
%
  string = ' ';

  for i = 0 : m
    string = strcat ( string, ' %d' );
  end

  input_unit = fopen ( input_filename );

  if ( input_unit < 0 )
    fprintf ( 1, '\n' );
    fprintf ( 1, 'I4MAT_DATA_READ - Error!\n' );
    fprintf ( 1, '  Could not open the input file.\n' );
    error ( 'I4MAT_DATA_READ - Error!' );
  end

  i = 0;

  while ( i < n )

    line = fgets ( input_unit );

    if ( line == -1 )
      fprintf ( 1, '\n' );
      fprintf ( 1, 'I4MAT_DATA_READ - Error!\n' );
      fprintf ( 1, '  End of input while reading data.\n' );
      error ( 'I4MAT_DATA_READ - Error!' );
    end

    if ( line(1) == '#' )

    elseif ( s_len_trim ( line ) == 0 )
      
    else

      [ x, count ] = sscanf ( line, string );

      if ( count == m )
        i = i + 1;
        table(1:m,i) = x(1:m);
      end

    end

  end

  fclose ( input_unit );

  return
end
function [ m, n ] = i4mat_header_read ( input_filename )

%*****************************************************************************80
%
%% I4MAT_HEADER_READ reads the header from an I4MAT file.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    22 October 2004
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, string INPUT_FILENAME, the name of the input file.
%
%    Output, integer M, the spatial dimension.
%
%    Output, integer N, the number of points.
%
  m = file_column_count ( input_filename );

  if ( m <= 0 )
    fprintf ( 1, '\n' );
    fprintf ( 1, 'I4MAT_HEADER_READ - Fatal error!\n' );
    fprintf ( 1, '  There was some kind of I/O problem while trying\n' );
    fprintf ( 1, '  to count the number of data columns in\n' );
    fprintf ( 1, '  the file %s.\n', input_filename );
  end

  n = file_row_count ( input_filename );

  if ( n <= 0 )
    fprintf ( 1, '\n' );
    fprintf ( 1, 'I4MAT_HEADER_READ - Fatal error!\n' );
    fprintf ( 1, '  There was some kind of I/O problem while trying\n' );
    fprintf ( 1, '  to count the number of data rows in\n' );
    fprintf ( 1, '  the file %s\n', input_filename );
  end

  return
end
function i4mat_transpose_print ( m, n, a, title )

%*****************************************************************************80
%
%% I4MAT_TRANSPOSE_PRINT prints an I4MAT, transposed.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    31 January 2005
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, integer M, N, the number of rows and columns.
%
%    Input, integer A(M,N), an M by N matrix to be printed.
%
%    Input, string TITLE, a title.
%
  i4mat_transpose_print_some ( m, n, a, 1, 1, m, n, title );

  return
end
function i4mat_transpose_print_some ( m, n, a, ilo, jlo, ihi, jhi, title )

%*****************************************************************************80
%
%% I4MAT_TRANSPOSE_PRINT_SOME prints some of an I4MAT, transposed.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    21 June 2005
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, integer M, N, the number of rows and columns.
%
%    Input, integer A(M,N), an M by N matrix to be printed.
%
%    Input, integer ILO, JLO, the first row and column to print.
%
%    Input, integer IHI, JHI, the last row and column to print.
%
%    Input, string TITLE, a title.
%
  incx = 10;

  fprintf ( 1, '\n' );
  fprintf ( 1, '%s\n', title );

  for i2lo = max ( ilo, 1 ) : incx : min ( ihi, m )

    i2hi = i2lo + incx - 1;
    i2hi = min ( i2hi, m );
    i2hi = min ( i2hi, ihi );

    inc = i2hi + 1 - i2lo;

    fprintf ( 1, '\n' );
    fprintf ( 1, '  Row: ' );
    for i = i2lo : i2hi
      fprintf ( 1, '%7d  ', i );
    end
    fprintf ( 1, '\n' );
    fprintf ( 1, '  Col\n' );
    fprintf ( 1, '\n' );

    j2lo = max ( jlo, 1 );
    j2hi = min ( jhi, n );

    for j = j2lo : j2hi

      fprintf ( 1, '%5d: ', j );
      for i2 = 1 : inc
        i = i2lo - 1 + i2;
        fprintf ( 1, '%7d  ', a(i,j) );
      end
      fprintf ( 1, '\n' );

    end

  end

  return
end
function element_node = mesh_base_one ( node_num, element_order, ...
  element_num, element_node )

%*****************************************************************************80
%
%% MESH_BASE_ONE ensures that the element definition is one-based.
%
%  Discussion:
%
%    The ELEMENT_NODE array contains nodes indices that form elements.
%    The convention for node indexing might start at 0 or at 1.
%    Since a MATLAB program will naturally assume a 1-based indexing, it is
%    necessary to check a given element definition and, if it is actually
%    0-based, to convert it.
%
%    This function attempts to detect 0-based node indexing and correct it.
%
%    Thanks to Feifei Xu for pointing out that I was subtracting 1 when I
%    should have been adding 1!  29 November 2012.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license. 
%
%  Modified:
%
%    29 November 2012
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, integer NODE_NUM, the number of nodes.
%
%    Input, integer ELEMENT_ORDER, the order of the elements.
%
%    Input, integer ELEMENT_NUM, the number of elements.
%
%    Input/output, integer ELEMENT_NODE(ELEMENT_ORDE,ELEMENT_NUM), the element
%    definitions.
%
  node_min = min ( min ( element_node(1:element_order,1:element_num) ) );
  node_max = max ( max ( element_node(1:element_order,1:element_num) ) );

  if ( node_min == 0 && node_max == node_num - 1 )
    fprintf ( 1, '\n' );
    fprintf ( 1, 'MESH_BASE_ONE:\n' );
    fprintf ( 1, '  The element indexing appears to be 0-based!\n' );
    fprintf ( 1, '  This will be converted to 1-based.\n' );
    element_node(1:element_order,1:element_num) = ...
      element_node(1:element_order,1:element_num) + 1;
  elseif ( node_min == 1 && node_max == node_num )
    fprintf ( 1, '\n' );
    fprintf ( 1, 'MESH_BASE_ONE:\n' );
    fprintf ( 1, '  The element indexing appears to be 1-based!\n' );
    fprintf ( 1, '  No conversion is necessary.\n' );
  else
    fprintf ( 1, '\n' );
    fprintf ( 1, 'MESH_BASE_ONE - Warning!\n' );
    fprintf ( 1, '  The element indexing is not of a recognized type.\n' );
    fprintf ( 1, '  NODE_MIN = %d\n', node_min );
    fprintf ( 1, '  NODE_MAX = %d\n', node_max );
    fprintf ( 1, '  NODE_NUM = %d\n', node_num );
  end

  return
end
function table = r8mat_data_read ( input_filename, m, n )

%*****************************************************************************80
%
%% R8MAT_DATA_READ reads data from an R8MAT file.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    27 January 2006
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, string INPUT_FILENAME, the name of the input file.
%
%    Input, integer M, N, the number of rows and columns of data.
%
%    Output, real TABLE(M,N), the point coordinates.
%
  table = zeros ( m, n );
%
%  Build up the format string for reading M real numbers.
%
  string = ' ';

  for i = 0 : m
    string = strcat ( string, ' %f' );
  end

  input_unit = fopen ( input_filename );

  if ( input_unit < 0 ) 
    fprintf ( 1, '\n' );
    fprintf ( 1, 'R8MAT_DATA_READ - Error!\n' );
    fprintf ( 1, '  Could not open the file.\n' );
    error ( 'R8MAT_DATA_READ - Error!' );
  end

  i = 0;

  while ( i < n )

    line = fgets ( input_unit );

    if ( line == -1 )
      break;
    end

    if ( line(1) == '#' )

    elseif ( s_len_trim ( line ) == 0 )
      
    else

      [ x, count ] = sscanf ( line, string );

      if ( count == m )
        i = i + 1;
        table(1:m,i) = x(1:m);
      end

    end

  end

  fclose ( input_unit );

  return
end
function [ m, n ] = r8mat_header_read ( input_filename )

%*****************************************************************************80
%
%% R8MAT_HEADER_READ reads the header from an R8MAT file.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    22 October 2004
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, string INPUT_FILENAME, the name of the input file.
%
%    Output, integer M, the spatial dimension.
%
%    Output, integer N, the number of points.
%
  m = file_column_count ( input_filename );

  if ( m <= 0 )
    fprintf ( 1, '\n' );
    fprintf ( 1, 'R8MAT_HEADER_READ - Fatal error!\n' );
    fprintf ( 1, '  There was some kind of I/O problem while trying\n' );
    fprintf ( 1, '  to count the number of data columns in\n' );
    fprintf ( 1, '  the file %s.\n', input_filename );
  end

  n = file_row_count ( input_filename );

  if ( n <= 0 )
    fprintf ( 1, '\n' );
    fprintf ( 1, 'R8MAT_HEADER_READ - Fatal error!\n' );
    fprintf ( 1, '  There was some kind of I/O problem while trying\n' );
    fprintf ( 1, '  to count the number of data rows in\n' );
    fprintf ( 1, '  the file %s\n', input_filename );
  end

  return
end
function r8mat_transpose_print ( m, n, a, title )

%*****************************************************************************80
%
%% R8MAT_TRANSPOSE_PRINT prints an R8MAT, transposed.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    10 August 2004
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, integer M, N, the number of rows and columns.
%
%    Input, real A(M,N), an M by N matrix to be printed.
%
%    Input, string TITLE, a title.
%
  r8mat_transpose_print_some ( m, n, a, 1, 1, m, n, title );

  return
end
function r8mat_transpose_print_some ( m, n, a, ilo, jlo, ihi, jhi, title )

%*****************************************************************************80
%
%% R8MAT_TRANSPOSE_PRINT_SOME prints some of an R8MAT, transposed.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    23 May 2005
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, integer M, N, the number of rows and columns.
%
%    Input, real A(M,N), an M by N matrix to be printed.
%
%    Input, integer ILO, JLO, the first row and column to print.
%
%    Input, integer IHI, JHI, the last row and column to print.
%
%    Input, string TITLE, a title.
%
  incx = 5;

  fprintf ( 1, '\n' );
  fprintf ( 1, '%s\n', title );

  for i2lo = max ( ilo, 1 ) : incx : min ( ihi, m )

    i2hi = i2lo + incx - 1;
    i2hi = min ( i2hi, m );
    i2hi = min ( i2hi, ihi );

    inc = i2hi + 1 - i2lo;
    
    fprintf ( 1, '\n' );
    fprintf ( 1, '  Row: ' );
    for i = i2lo : i2hi
      fprintf ( 1, '%7d       ', i );
    end
    fprintf ( 1, '\n' );
    fprintf ( 1, '  Col\n' );

    j2lo = max ( jlo, 1 );
    j2hi = min ( jhi, n );

    for j = j2lo : j2hi

      fprintf ( 1, '%5d:', j );
      for i2 = 1 : inc
        i = i2lo - 1 + i2;
        fprintf ( 1, '%12f', a(i,j) );
      end
      fprintf ( 1, '\n' );

    end

  end

  return
end
function len = s_len_trim ( s )

%*****************************************************************************80
%
%% S_LEN_TRIM returns the length of a character string to the last nonblank.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    14 June 2003
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, string S, the string to be measured.
%
%    Output, integer LEN, the length of the string up to the last nonblank.
%
  len = length ( s );

  while ( 0 < len )
    if ( s(len) ~= ' ' )
      return
    end
    len = len - 1;
  end

  return
end
function word_num = s_word_count ( s )

%*****************************************************************************80
%
%% S_WORD_COUNT counts the number of "words" in a string.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    30 January 2006
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, string S, the string to be examined.
%
%    Output, integer WORD_NUM, the number of "words" in the string.
%    Words are presumed to be separated by one or more blanks.
%
  FALSE = 0;
  TRUE = 1;

  word_num = 0;
  s_length = length ( s );

  if ( s_length <= 0 )
    return;
  end

  blank = TRUE;

  for i = 1 : s_length

    if ( s(i) == ' ' )
      blank = TRUE;
    elseif ( blank == TRUE )
      word_num = word_num + 1;
      blank = FALSE;
    end

  end

  return
end
function timestamp ( )

%*****************************************************************************80
%
%% TIMESTAMP prints the current YMDHMS date as a timestamp.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    14 February 2003
%
%  Author:
%
%    John Burkardt
%
  t = now;
  c = datevec ( t );
  s = datestr ( c, 0 );
  fprintf ( 1, '%s\n', s );

  return
end
function triangle_element_write ( element_filename, element_num, ...
  element_order, element_att_num, element_node, element_att )

%*****************************************************************************80
%
%% TRIANGLE_ELEMENT_WRITE writes a TRIANGLE ".ele" file.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    11 October 2014
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, string ELEMENT_FILENAME, the name of the file
%    to be written.
%
%    Input, integer ELEMENT_NUM, the number of elements.
%
%    Input, integer ELEMENT_ORDER, the order of the elements.
%
%    Input, integer ELEMENT_ATT_NUM, the number of element 
%    attributes.
%
%    Input, integer ELEMENT_NODE(ELEMENT_ORDER,ELEMENT_NUM), 
%    the indices of the nodes that make up each element.
%
%    Input, real ELEMENT_ATT(ELEMENT_ATT_NUM,ELEMENT_NUM), 
%    the attributes of each element.
%
  output  = fopen ( element_filename, 'wt' );

  if ( output < 0 )
    fprintf ( 1, '\n' );
    fprintf ( 1, 'TRIANGLE_ELEMENT_WRITE - Fatal error!\n' );
    fprintf ( 1, '  Unable to open file.\n' );
    error ( 'TRIANGLE_ELEMENT_WRITE - Fatal error!' );
  end

  fprintf ( output, '%d  %d  %d\n', ...
    element_num, element_order, element_att_num );

  for element = 1 : element_num

    fprintf ( output, '%d', element );

    for order = 1 : element_order
      fprintf ( output, '  %d', element_node(order,element) );
    end

    for att = 1 : element_att_num
      fprintf ( output, '  %g', element_att(att,element) );
    end

    fprintf ( output, '\n' );

  end

  fclose ( output );

  return
end
function triangle_node_write ( node_filename, node_num, node_dim, ...
  node_att_num, node_marker_num, node_coord, node_att, node_marker )

%*****************************************************************************80
%
%% TRIANGLE_NODE_WRITE writes a TRIANGLE ".node" file.
%
%  Licensing:
%
%    This code is distributed under the GNU LGPL license.
%
%  Modified:
%
%    11 October 2014
%
%  Author:
%
%    John Burkardt
%
%  Parameters:
%
%    Input, string NODE_FILENAME, the name of the node file.
%
%    Input, integer NODE_NUM, the number of nodes.
%
%    Input, integer NODE_DIM, the spatial dimension.
%
%    Input, integer NODE_ATT_NUM, number of node attributes
%    listed on each node record.
%
%    Input, integer NODE_MARKER_NUM, 1 if every node record 
%    includes a final boundary marker value.
%
%    Output, real NODE_COORD(NODE_DIM*NODE_NUM), the nodal 
%    coordinates.
%
%    Output, real NODE_ATT(NODE_ATT_NUM*NODE_NUM), the nodal
%    attributes.
%
%    Output, integer NODE_MARKER(NODE_MARKER_NUM,NODE_NUM), 
%    the node markers.
%
  output = fopen ( node_filename, 'wt' );

  if ( output < 0 )
    fprintf ( 1, '\n' );
    fprintf ( 1, 'TRIANGLE_NODE_WRITE - Fatal error!\n' );
    fprintf ( 1, '  Unable to open file.\n' );
    error ( 'TRIANGLE_NODE_WRITE - Fatal error!' );
  end

  fprintf ( output, '%d  %d  %d  %d\n', ...
    node_num, node_dim, node_att_num, node_marker_num );

  for node = 1 : node_num

    fprintf ( output, '%d', node );

    for dim = 1 : node_dim
      fprintf ( output, '  %g', node_coord(dim,node) );
    end

    for att = 1 : node_att_num
      fprintf ( output, '  %g', node_att(att,node) );
    end

    for marker = 1 : node_marker_num
      fprintf ( output, '  %d', node_marker(marker,node) );
    end

    fprintf ( output, '\n' );

  end

  fclose ( output );

  return
end
