program main

!*****************************************************************************80
!
!! MAIN is the main program for TET_MESH_VOLUMES.
!
!  Discussion:
!
!    TET_MESH_VOLUMES determines the element volumes of a tet mesh.
!
!  Usage:
!
!    tet_mesh_volumes prefix
!
!    where
!
!    * prefix_nodes.txt contains nodal coordinates;
!    * prefix_elements.txt contains the element definitions;
!    * prefix_volumes.txt will contain the element volumes.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    12 August 2009
!
!  Author:
!
!    John Burkardt
!
  implicit none
  
  integer ( kind = 4 ) arg_num
  integer ( kind = 4 ) dim_num
  integer ( kind = 4 ) element
  character ( len = 255 ) :: element_filename = ' '
  integer ( kind = 4 ), allocatable :: element_node(:,:)
  integer ( kind = 4 ) element_num
  integer ( kind = 4 ) element_order
  integer ( kind = 4 ) i
  integer ( kind = 4 ) iarg
  integer ( kind = 4 ) iargc
  character ( len = 255 ) :: node_filename = ' '
  integer ( kind = 4 ) node_num
  real ( kind = 8 ), allocatable :: node_xyz(:,:)
  character ( len = 255 ) prefix
  real ( kind = 8 ) tetra(3,4)
  real ( kind = 8 ), allocatable :: volume(:)
  real ( kind = 8 ) volume_ave
  character ( len = 255 ) :: volume_filename = ' '
  real ( kind = 8 ) volume_max
  real ( kind = 8 ) volume_min
  real ( kind = 8 ) volume_tot
  real ( kind = 8 ) volume_var

  write ( *, '(a)' ) ' '
  call timestamp ( )

  write ( *, '(a)' ) ' '
  write ( *, '(a)' ) 'TET_MESH_VOLUMES:'
  write ( *, '(a)' ) '  FORTRAN90 version:'
  write ( *, '(a)' ) '  Compute volume of each tetrahedron in a tet mesh.'
!
!  Get the number of command line arguments.
!
  arg_num = iargc ( )
!
!  Argument 1 is the common file prefix.
!
  if ( 1 <= arg_num ) then

    iarg = 1
    call getarg ( iarg, prefix )

  else

    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'TET_MESH_VOLUMES:'
    write ( *, '(a)' ) '  Please enter the filename prefix:'

    read ( *, '(a)' ) prefix

  end if
!
!  Create the filenames.
!
  node_filename = trim ( prefix ) // '_nodes.txt'
  element_filename = trim ( prefix ) // '_elements.txt'
  volume_filename = trim ( prefix ) // '_volumes.txt'
!
!  Read the node data.
!
  call r8mat_header_read ( node_filename, dim_num, node_num )

  write ( *, '(a)' ) ' '
  write ( *, '(a)' ) '  Read the header of "' &
    // trim ( node_filename ) //'".'
  write ( *, '(a)' ) ' '
  write ( *, '(a,i8)' ) '  Spatial dimension DIM_NUM = ', dim_num
  write ( *, '(a,i8)' ) '  Number of points NODE_NUM  = ', node_num

  if ( dim_num /= 3 ) then
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'TET_MESH_VOLUMES - Fatal error!'
    write ( *, '(a)' ) '  Dataset must have spatial dimension 3.'
    stop
  end if

  allocate ( node_xyz(1:dim_num,1:node_num) )

  call r8mat_data_read ( node_filename, dim_num, node_num, node_xyz )

  write ( *, '(a)' ) ' '
  write ( *, '(a)' ) '  Read the data in "' &
    // trim ( node_filename ) //'".'

  call r8mat_transpose_print_some ( dim_num, node_num, node_xyz, 1, 1, 5, 5, &
    '  5 by 5 portion of data read from file:' )
!
!  Read the element data.
!
  call i4mat_header_read ( element_filename, element_order, &
    element_num )

  if ( element_order /= 4 .and. element_order /= 10 ) then
    write ( *, * ) ' '
    write ( *, '(a)' ) 'TET_MESH_VOLUMES - Fatal error!'
    write ( *, '(a)' ) '  Data is not for a 4 or 10 node tet mesh.'
    stop
  end if

  write ( *, '(a)' ) ' '
  write ( *, '(a)' ) '  Read the header of "' &
    // trim ( element_filename ) //'".'
  write ( *, '(a)' ) ' '
  write ( *, '(a,i8)' ) '  Element order = ', element_order
  write ( *, '(a,i8)' ) '  Number of elements  = ', element_num

  allocate ( element_node(1:element_order,1:element_num) )

  call i4mat_data_read ( element_filename, element_order, &
    element_num, element_node )

  write ( *, '(a)' ) ' '
  write ( *, '(a)' ) '  Read the data in "' &
    // trim ( element_filename ) //'".'

  call i4mat_transpose_print_some ( element_order, element_num, &
    element_node, 1, 1, element_order, 10, '  First 10 elements:' )
!
!  Detect and correct zero-based indexing.
!
  call mesh_base_one ( node_num, element_order, element_num, element_node )
!
!  Compute the volumes.
!
  allocate ( volume(1:element_num) )

  do element = 1, element_num
    tetra(1:3,1:4) = node_xyz(1:3,element_node(1:4,element))
    call tetrahedron_volume ( tetra, volume(element) )
  end do

  volume_max = maxval ( volume(1:element_num) )
  volume_min = minval ( volume(1:element_num) )
  volume_ave = sum ( volume(1:element_num) ) / real ( element_num, kind = 8 )
  volume_tot = sum ( volume(1:element_num) )
  call r8vec_variance ( element_num, volume, volume_var )
 
  write ( *, '(a)' ) ' '
  write ( *, '(a,g14.6)' ) '  Minimum: ', volume_min
  write ( *, '(a,g14.6)' ) '  Average: ', volume_ave
  write ( *, '(a,g14.6)' ) '  Maximum: ', volume_max
  write ( *, '(a,g14.6)' ) '  Total:   ', volume_tot
  write ( *, '(a,g14.6)' ) '  Variance:', volume_var

  call r8mat_write ( volume_filename, 1, element_num, volume )

  write ( *, '(a)' ) ' '
  write ( *, '(a)' ) &
    '  Full list of volumes written to "' // trim ( volume_filename ) // '".'
!
!  Free memory.
!
  deallocate ( element_node )
  deallocate ( node_xyz )
  deallocate ( volume )
!
!  Terminate.
!
  write ( *, '(a)' ) ' '
  write ( *, '(a)' ) 'TET_MESH_VOLUMES:'
  write ( *, '(a)' ) '  Normal end of execution.'

  write ( *, '(a)' ) ' '
  call timestamp ( )

  stop
end
subroutine ch_cap ( c )

!*****************************************************************************80
!
!! CH_CAP capitalizes a single character.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license.
!
!  Modified:
!
!    19 July 1998
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input/output, character C, the character to capitalize.
!
  implicit none

  character c
  integer ( kind = 4 ) itemp

  itemp = ichar ( c )

  if ( 97 <= itemp .and. itemp <= 122 ) then
    c = char ( itemp - 32 )
  end if

  return
end
function ch_eqi ( c1, c2 )

!*****************************************************************************80
!
!! CH_EQI is a case insensitive comparison of two characters for equality.
!
!  Example:
!
!    CH_EQI ( 'A', 'a' ) is .TRUE.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license.
!
!  Modified:
!
!    28 July 2000
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character C1, C2, the characters to compare.
!
!    Output, logical CH_EQI, the result of the comparison.
!
  implicit none

  logical ch_eqi
  character c1
  character c1_cap
  character c2
  character c2_cap

  c1_cap = c1
  c2_cap = c2

  call ch_cap ( c1_cap )
  call ch_cap ( c2_cap )

  if ( c1_cap == c2_cap ) then
    ch_eqi = .true.
  else
    ch_eqi = .false.
  end if

  return
end
subroutine ch_to_digit ( c, digit )

!*****************************************************************************80
!
!! CH_TO_DIGIT returns the value of a base 10 digit.
!
!  Example:
!
!     C   DIGIT
!    ---  -----
!    '0'    0
!    '1'    1
!    ...  ...
!    '9'    9
!    ' '    0
!    'X'   -1
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license.
!
!  Modified:
!
!    04 August 1999
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character C, the decimal digit, '0' through '9' or blank
!    are legal.
!
!    Output, integer ( kind = 4 ) DIGIT, the corresponding value.
!    If C was 'illegal', then DIGIT is -1.
!
  implicit none

  character c
  integer ( kind = 4 ) digit

  if ( lge ( c, '0' ) .and. lle ( c, '9' ) ) then

    digit = ichar ( c ) - 48

  else if ( c == ' ' ) then

    digit = 0

  else

    digit = -1

  end if

  return
end
subroutine file_column_count ( input_file_name, column_num )

!*****************************************************************************80
!
!! FILE_COLUMN_COUNT counts the number of columns in the first line of a file.
!
!  Discussion:
!
!    The file is assumed to be a simple text file.
!
!    Most lines of the file is presumed to consist of COLUMN_NUM words,
!    separated by spaces.  There may also be some blank lines, and some
!    comment lines,
!    which have a "#" in column 1.
!
!    The routine tries to find the first non-comment non-blank line and
!    counts the number of words in that line.
!
!    If all lines are blanks or comments, it goes back and tries to analyze
!    a comment line.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license.
!
!  Modified:
!
!    21 June 2001
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) INPUT_FILE_NAME, the name of the file.
!
!    Output, integer ( kind = 4 ) COLUMN_NUM, the number of columns in the file.
!
  implicit none

  integer ( kind = 4 ) column_num
  logical got_one
  character ( len = * ) input_file_name
  integer ( kind = 4 ) input_status
  integer ( kind = 4 ) input_unit
  character ( len = 255 ) line
!
!  Open the file.
!
  call get_unit ( input_unit )

  open ( unit = input_unit, file = input_file_name, status = 'old', &
    form = 'formatted', access = 'sequential', iostat = input_status )

  if ( input_status /= 0 ) then
    column_num = -1
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'FILE_COLUMN_COUNT - Fatal error!'
    write ( *, '(a,i8)' ) '  Could not open the input file "' &
      // trim ( input_file_name ) // '" on unit ', input_unit
    return
  end if
!
!  Read one line, but skip blank lines and comment lines.
!
  got_one = .false.

  do

    read ( input_unit, '(a)', iostat = input_status ) line

    if ( input_status /= 0 ) then
      exit
    end if

    if ( len_trim ( line ) == 0 ) then
      cycle
    end if

    if ( line(1:1) == '#' ) then
      cycle
    end if

    got_one = .true.
    exit

  end do

  if ( .not. got_one ) then

    rewind ( input_unit )

    do

      read ( input_unit, '(a)', iostat = input_status ) line

      if ( input_status /= 0 ) then
        exit
      end if

      if ( len_trim ( line ) == 0 ) then
        cycle
      end if

      got_one = .true.
      exit

    end do

  end if

  close ( unit = input_unit )

  if ( .not. got_one ) then
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'FILE_COLUMN_COUNT - Warning!'
    write ( *, '(a)' ) '  The file does not seem to contain any data.'
    column_num = -1
    return
  end if

  call s_word_count ( line, column_num )

  return
end
subroutine file_row_count ( input_file_name, row_num )

!*****************************************************************************80
!
!! FILE_ROW_COUNT counts the number of row records in a file.
!
!  Discussion:
!
!    It does not count lines that are blank, or that begin with a
!    comment symbol '#'.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license.
!
!  Modified:
!
!    06 March 2003
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) INPUT_FILE_NAME, the name of the input file.
!
!    Output, integer ( kind = 4 ) ROW_NUM, the number of rows found.
!
  implicit none

  integer ( kind = 4 ) bad_num
  integer ( kind = 4 ) comment_num
  integer ( kind = 4 ) ierror
  character ( len = * ) input_file_name
  integer ( kind = 4 ) input_status
  integer ( kind = 4 ) input_unit
  character ( len = 255 ) line
  integer ( kind = 4 ) record_num
  integer ( kind = 4 ) row_num

  call get_unit ( input_unit )

  open ( unit = input_unit, file = input_file_name, status = 'old', &
    iostat = input_status )

  if ( input_status /= 0 ) then
    row_num = -1;
    ierror = 1
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'FILE_ROW_COUNT - Fatal error!'
    write ( *, '(a,i8)' ) '  Could not open the input file "' // &
      trim ( input_file_name ) // '" on unit ', input_unit
    stop
  end if

  comment_num = 0
  row_num = 0
  record_num = 0
  bad_num = 0

  do

    read ( input_unit, '(a)', iostat = input_status ) line

    if ( input_status /= 0 ) then
      ierror = record_num
      exit
    end if

    record_num = record_num + 1

    if ( line(1:1) == '#' ) then
      comment_num = comment_num + 1
      cycle
    end if

    if ( len_trim ( line ) == 0 ) then
      comment_num = comment_num + 1
      cycle
    end if

    row_num = row_num + 1

  end do

  close ( unit = input_unit )

  return
end
subroutine get_unit ( iunit )

!*****************************************************************************80
!
!! GET_UNIT returns a free FORTRAN unit number.
!
!  Discussion:
!
!    A "free" FORTRAN unit number is a value between 1 and 99 which
!    is not currently associated with an I/O device.  A free FORTRAN unit
!    number is needed in order to open a file with the OPEN command.
!
!    If IUNIT = 0, then no free FORTRAN unit could be found, although
!    all 99 units were checked (except for units 5, 6 and 9, which
!    are commonly reserved for console I/O).
!
!    Otherwise, IUNIT is a value between 1 and 99, representing a
!    free FORTRAN unit.  Note that GET_UNIT assumes that units 5 and 6
!    are special, and will never return those values.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license.
!
!  Modified:
!
!    26 October 2008
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Output, integer ( kind = 4 ) IUNIT, the free unit number.
!
  implicit none

  integer ( kind = 4 ) i
  integer ( kind = 4 ) ios
  integer ( kind = 4 ) iunit
  logical lopen

  iunit = 0

  do i = 1, 99

    if ( i /= 5 .and. i /= 6 .and. i /= 9 ) then

      inquire ( unit = i, opened = lopen, iostat = ios )

      if ( ios == 0 ) then
        if ( .not. lopen ) then
          iunit = i
          return
        end if
      end if

    end if

  end do

  return
end
subroutine i4mat_data_read ( input_file_name, m, n, table )

!*****************************************************************************80
!
!! I4MAT_DATA_READ reads data from an I4MAT file.
!
!  Discussion:
!
!    The file may contain more than N points, but this routine
!    will return after reading N points.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license.
!
!  Modified:
!
!    27 January 2005
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) INPUT_FILE_NAME, the name of the input file.
!
!    Input, integer ( kind = 4 ) M, the spatial dimension.
!
!    Input, integer ( kind = 4 ) N, the number of points.
!
!    Output, integer ( kind = 4 ) TABLE(M,N), the table data.
!
  implicit none

  integer ( kind = 4 ) m
  integer ( kind = 4 ) n

  integer ( kind = 4 ) ierror
  character ( len = * ) input_file_name
  integer ( kind = 4 ) input_status
  integer ( kind = 4 ) input_unit
  integer ( kind = 4 ) j
  character ( len = 255 ) line
  integer ( kind = 4 ) table(m,n)
  integer ( kind = 4 ) x(m)

  ierror = 0

  call get_unit ( input_unit )

  open ( unit = input_unit, file = input_file_name, status = 'old', &
    iostat = input_status )

  if ( input_status /= 0 ) then
    ierror = 1
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'I4MAT_DATA_READ - Fatal error!'
    write ( *, '(a,i8)' ) '  Could not open the input file "' // &
      trim ( input_file_name ) // '" on unit ', input_unit
    stop
  end if

  j = 0

  do while ( j < n )

    read ( input_unit, '(a)', iostat = input_status ) line

    if ( input_status /= 0 ) then
      ierror = 2
      write ( *, '(a)' ) ' '
      write ( *, '(a)' ) 'I4MAT_DATA_READ - Fatal error!'
      write ( *, '(a)' ) '  Error while reading lines of data.'
      write ( *, '(a,i8)' ) '  Number of values expected per line M = ', m
      write ( *, '(a,i8)' ) '  Number of data lines read, J =         ', j
      write ( *, '(a,i8)' ) '  Number of data lines needed, N =       ', n
      stop
    end if

    if ( line(1:1) == '#' .or. len_trim ( line ) == 0 ) then
      cycle
    end if

    call s_to_i4vec ( line, m, x, ierror )

    if ( ierror /= 0 ) then
      cycle
    end if

    j = j + 1

    table(1:m,j) = x(1:m)

  end do

  close ( unit = input_unit )

  return
end
subroutine i4mat_header_read ( input_file_name, m, n )

!*****************************************************************************80
!
!! I4MAT_HEADER_READ reads the header from an I4MAT.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license.
!
!  Modified:
!
!    04 June 2004
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) INPUT_FILE_NAME, the name of the input file.
!
!    Output, integer ( kind = 4 ) M, spatial dimension.
!
!    Output, integer ( kind = 4 ) N, the number of points.
!
  implicit none

  character ( len = * ) input_file_name
  integer ( kind = 4 ) m
  integer ( kind = 4 ) n

  call file_column_count ( input_file_name, m )

  if ( m <= 0 ) then
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'I4MAT_HEADER_READ - Fatal error!'
    write ( *, '(a)' ) '  There was some kind of I/O problem while trying'
    write ( *, '(a)' ) '  to count the number of data columns in'
    write ( *, '(a)' ) '  the file "' // trim ( input_file_name ) // '".'
    stop
  end if

  call file_row_count ( input_file_name, n )

  if ( n <= 0 ) then
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'I4MAT_HEADER_READ - Fatal error!'
    write ( *, '(a)' ) '  There was some kind of I/O problem while trying'
    write ( *, '(a)' ) '  to count the number of data rows in'
    write ( *, '(a)' ) '  the file "' // trim ( input_file_name ) // '".'
    stop
  end if

  return
end
subroutine i4mat_transpose_print_some ( m, n, a, ilo, jlo, ihi, jhi, title )

!*****************************************************************************80
!
!! I4MAT_TRANSPOSE_PRINT_SOME prints some of the transpose of an I4MAT.
!
!  Discussion:
!
!    An I4MAT is a rectangular array of I4 values.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    09 February 2005
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, integer ( kind = 4 ) M, N, the number of rows and columns.
!
!    Input, integer ( kind = 4 ) A(M,N), an M by N matrix to be printed.
!
!    Input, integer ILO, JLO, the first row and column to print.
!
!    Input, integer IHI, JHI, the last row and column to print.
!
!    Input, character ( len = * ) TITLE, an optional title.
!
  implicit none

  integer ( kind = 4 ), parameter :: incx = 10
  integer ( kind = 4 ) m
  integer ( kind = 4 ) n

  integer ( kind = 4 ) a(m,n)
  character ( len = 8 )  ctemp(incx)
  integer ( kind = 4 ) i
  integer ( kind = 4 ) i2
  integer ( kind = 4 ) i2hi
  integer ( kind = 4 ) i2lo
  integer ( kind = 4 ) ihi
  integer ( kind = 4 ) ilo
  integer ( kind = 4 ) inc
  integer ( kind = 4 ) j
  integer ( kind = 4 ) j2hi
  integer ( kind = 4 ) j2lo
  integer ( kind = 4 ) jhi
  integer ( kind = 4 ) jlo
  character ( len = * ) title

  if ( 0 < len_trim ( title ) ) then
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) trim ( title )
  end if

  do i2lo = max ( ilo, 1 ), min ( ihi, m ), incx

    i2hi = i2lo + incx - 1
    i2hi = min ( i2hi, m )
    i2hi = min ( i2hi, ihi )

    inc = i2hi + 1 - i2lo

    write ( *, '(a)' ) ' '

    do i = i2lo, i2hi
      i2 = i + 1 - i2lo
      write ( ctemp(i2), '(i8)' ) i
    end do

    write ( *, '(''  Row '',10a8)' ) ctemp(1:inc)
    write ( *, '(a)' ) '  Col'
    write ( *, '(a)' ) ' '

    j2lo = max ( jlo, 1 )
    j2hi = min ( jhi, n )

    do j = j2lo, j2hi

      do i2 = 1, inc

        i = i2lo - 1 + i2

        write ( ctemp(i2), '(i8)' ) a(i,j)

      end do

      write ( *, '(i5,1x,10a8)' ) j, ( ctemp(i), i = 1, inc )

    end do

  end do

  return
end
subroutine mesh_base_one ( node_num, element_order, element_num, element_node )

!*****************************************************************************80
!
!! MESH_BASE_ONE ensures that the element definition is one-based.
!
!  Discussion:
!
!    The ELEMENT_NODE array contains nodes indices that form elements.
!    The convention for node indexing might start at 0 or at 1.
!    Since a FORTRAN90 program will naturally assume a 1-based indexing, it is
!    necessary to check a given element definition and, if it is actually
!    0-based, to convert it.
!
!    This function attempts to detect 9-based node indexing and correct it.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    29 September 2009
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, int NODE_NUM, the number of nodes.
!
!    Input, int ELEMENT_ORDER, the order of the elements.
!
!    Input, int ELEMENT_NUM, the number of elements.
!
!    Input/output, int ELEMENT_NODE(ELEMENT_ORDER,ELEMENT_NUM), the element
!    definitions.
!
  implicit none

  integer ( kind = 4 ) element_num
  integer ( kind = 4 ) element_order

  integer ( kind = 4 ) element
  integer ( kind = 4 ) element_node(element_order,element_num)
  integer ( kind = 4 ) node
  integer ( kind = 4 ) node_max
  integer ( kind = 4 ) node_min
  integer ( kind = 4 ) node_num
  integer ( kind = 4 ) order

  node_min = node_num + 1
  node_max = -1

  node_min = minval ( element_node(1:element_order,1:element_num) )
  node_max = maxval ( element_node(1:element_order,1:element_num) )

  if ( node_min == 0 .and. node_max == node_num - 1 ) then
    write ( *, '(a)' ) ' '
    write ( *, '(a)' )'MESH_BASE_ONE:'
    write ( *, '(a)' )'  The element indexing appears to be 0-based!'
    write ( *, '(a)' )'  This will be converted to 1-based.'
    element_node(1:element_order,1:element_num) = &
      element_node(1:element_order,1:element_num) + 1
  else if ( node_min == 1 .and. node_max == node_num  ) then
    write ( *, '(a)' ) ' '
    write ( *, '(a)' )'MESH_BASE_ONE:'
    write ( *, '(a)' )'  The element indexing appears to be 1-based!'
    write ( *, '(a)' )'  No conversion is necessary.'
  else
    write ( *, '(a)' ) ' '
    write ( *, '(a)' )'MESH_BASE_ONE - Warning!'
    write ( *, '(a)' )' The element indexing is not of a recognized type.'
  end if

  return
end
subroutine r8mat_data_read ( input_file_name, m, n, table )

!*****************************************************************************80
!
!! R8MAT_DATA_READ reads data from an R8MAT file.
!
!  Discussion:
!
!    The file may contain more than N points, but this routine will
!    return after reading N of them.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license.
!
!  Modified:
!
!    18 October 2008
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) INPUT_FILE_NAME, the name of the input file.
!
!    Input, integer ( kind = 4 ) M, the spatial dimension.
!
!    Input, integer ( kind = 4 ) N, the number of points.
!
!    Output, real ( kind = 8 ) TABLE(M,N), the table data.
!
  implicit none

  integer ( kind = 4 ) m
  integer ( kind = 4 ) n

  integer ( kind = 4 ) ierror
  character ( len = * ) input_file_name
  integer ( kind = 4 ) input_status
  integer ( kind = 4 ) input_unit
  integer ( kind = 4 ) j
  character ( len = 255 ) line
  real ( kind = 8 ) table(m,n)
  real ( kind = 8 ) x(m)

  ierror = 0

  call get_unit ( input_unit )

  open ( unit = input_unit, file = input_file_name, status = 'old', &
    iostat = input_status )

  if ( input_status /= 0 ) then
    ierror = 1
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'R8MAT_DATA_READ - Fatal error!'
    write ( *, '(a,i8)' ) '  Could not open the input file "' // &
      trim ( input_file_name ) // '" on unit ', input_unit
    stop
  end if

  j = 0

  do while ( j < n )

    read ( input_unit, '(a)', iostat = input_status ) line

    if ( input_status /= 0 ) then
      write ( *, '(a)' ) ' '
      write ( *, '(a)' ) 'R8MAT_DATA_READ - Fatal error!'
      write ( *, '(a)' ) '  Error while reading lines of data.'
      write ( *, '(a,i8)' ) '  Number of values expected per line M = ', m
      write ( *, '(a,i8)' ) '  Number of data lines read, J =         ', j
      write ( *, '(a,i8)' ) '  Number of data lines needed, N =       ', n
      stop
    end if

    if ( line(1:1) == '#' .or. len_trim ( line ) == 0 ) then
      cycle
    end if

    call s_to_r8vec ( line, m, x, ierror )

    if ( ierror /= 0 ) then
      cycle
    end if

    j = j + 1

    table(1:m,j) = x(1:m)

  end do

  close ( unit = input_unit )

  return
end
function r8mat_det_4d ( a )

!*****************************************************************************80
!
!! R8MAT_DET_4D computes the determinant of a 4 by 4 matrix.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    16 April 1999
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, real ( kind = 8 ) A(4,4), the matrix whose determinant is desired.
!
!    Output, real ( kind = 8 ) R8MAT_DET_4D, the determinant of the matrix.
!
  implicit none

  real ( kind = 8 ) a(4,4)
  real ( kind = 8 ) r8mat_det_4d

  r8mat_det_4d = &
      a(1,1) * ( &
        a(2,2) * ( a(3,3) * a(4,4) - a(3,4) * a(4,3) ) &
      - a(2,3) * ( a(3,2) * a(4,4) - a(3,4) * a(4,2) ) &
      + a(2,4) * ( a(3,2) * a(4,3) - a(3,3) * a(4,2) ) ) &
    - a(1,2) * ( &
        a(2,1) * ( a(3,3) * a(4,4) - a(3,4) * a(4,3) ) &
      - a(2,3) * ( a(3,1) * a(4,4) - a(3,4) * a(4,1) ) &
      + a(2,4) * ( a(3,1) * a(4,3) - a(3,3) * a(4,1) ) ) &
    + a(1,3) * ( &
        a(2,1) * ( a(3,2) * a(4,4) - a(3,4) * a(4,2) ) &
      - a(2,2) * ( a(3,1) * a(4,4) - a(3,4) * a(4,1) ) &
      + a(2,4) * ( a(3,1) * a(4,2) - a(3,2) * a(4,1) ) ) &
    - a(1,4) * ( &
        a(2,1) * ( a(3,2) * a(4,3) - a(3,3) * a(4,2) ) &
      - a(2,2) * ( a(3,1) * a(4,3) - a(3,3) * a(4,1) ) &
      + a(2,3) * ( a(3,1) * a(4,2) - a(3,2) * a(4,1) ) )

  return
end
subroutine r8mat_header_read ( input_file_name, m, n )

!*****************************************************************************80
!
!! R8MAT_HEADER_READ reads the header from an R8MAT file.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license.
!
!  Modified:
!
!    07 September 2004
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) INPUT_FILE_NAME, the name of the input file.
!
!    Output, integer ( kind = 4 ) M, spatial dimension.
!
!    Output, integer ( kind = 4 ) N, the number of points.
!
  implicit none

  character ( len = * )  input_file_name
  integer ( kind = 4 ) m
  integer ( kind = 4 ) n

  call file_column_count ( input_file_name, m )

  if ( m <= 0 ) then
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'R8MAT_HEADER_READ - Fatal error!'
    write ( *, '(a)' ) '  There was some kind of I/O problem while trying'
    write ( *, '(a)' ) '  to count the number of data columns in'
    write ( *, '(a)' ) '  the file "' // trim ( input_file_name ) // '".'
    stop
  end if

  call file_row_count ( input_file_name, n )

  if ( n <= 0 ) then
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'R8MAT_HEADER_READ - Fatal error!'
    write ( *, '(a)' ) '  There was some kind of I/O problem while trying'
    write ( *, '(a)' ) '  to count the number of data rows in'
    write ( *, '(a)' ) '  the file "' // trim ( input_file_name ) // '".'
    stop
  end if

  return
end
subroutine r8mat_transpose_print_some ( m, n, a, ilo, jlo, ihi, jhi, title )

!*****************************************************************************80
!
!! R8MAT_TRANSPOSE_PRINT_SOME prints some of an R8MAT, transposed.
!
!  Discussion:
!
!    An R8MAT is an array of R8 values.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    14 June 2004
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, integer ( kind = 4 ) M, N, the number of rows and columns.
!
!    Input, real ( kind = 8 ) A(M,N), an M by N matrix to be printed.
!
!    Input, integer ( kind = 4 ) ILO, JLO, the first row and column to print.
!
!    Input, integer ( kind = 4 ) IHI, JHI, the last row and column to print.
!
!    Input, character ( len = * ) TITLE, a title.
!
  implicit none

  integer ( kind = 4 ), parameter :: incx = 5
  integer ( kind = 4 ) m
  integer ( kind = 4 ) n

  real ( kind = 8 ) a(m,n)
  character ( len = 14 ) ctemp(incx)
  integer ( kind = 4 ) i
  integer ( kind = 4 ) i2
  integer ( kind = 4 ) i2hi
  integer ( kind = 4 ) i2lo
  integer ( kind = 4 ) ihi
  integer ( kind = 4 ) ilo
  integer ( kind = 4 ) inc
  integer ( kind = 4 ) j
  integer ( kind = 4 ) j2hi
  integer ( kind = 4 ) j2lo
  integer ( kind = 4 ) jhi
  integer ( kind = 4 ) jlo
  character ( len = * ) title

  if ( 0 < len_trim ( title ) ) then
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) trim ( title )
  end if

  do i2lo = max ( ilo, 1 ), min ( ihi, m ), incx

    i2hi = i2lo + incx - 1
    i2hi = min ( i2hi, m )
    i2hi = min ( i2hi, ihi )

    inc = i2hi + 1 - i2lo

    write ( *, '(a)' ) ' '

    do i = i2lo, i2hi
      i2 = i + 1 - i2lo
      write ( ctemp(i2), '(i8,6x)' ) i
    end do

    write ( *, '(''  Row   '',5a14)' ) ctemp(1:inc)
    write ( *, '(a)' ) '  Col'
    write ( *, '(a)' ) ' '

    j2lo = max ( jlo, 1 )
    j2hi = min ( jhi, n )

    do j = j2lo, j2hi

      do i2 = 1, inc
        i = i2lo - 1 + i2
        write ( ctemp(i2), '(g14.6)' ) a(i,j)
      end do

      write ( *, '(i5,1x,5a14)' ) j, ( ctemp(i), i = 1, inc )

    end do

  end do

  return
end
subroutine r8mat_write ( output_file_name, m, n, table )

!*****************************************************************************80
!
!! R8MAT_WRITE writes an R8MAT file.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license.
!
!  Modified:
!
!    31 May 2009
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) OUTPUT_FILE_NAME, the output file name.
!
!    Input, integer ( kind = 4 ) M, the spatial dimension.
!
!    Input, integer ( kind = 4 ) N, the number of points.
!
!    Input, real ( kind = 8 ) TABLE(M,N), the table data.
!
  implicit none

  integer ( kind = 4 ) m
  integer ( kind = 4 ) n

  integer ( kind = 4 ) j
  character ( len = * )  output_file_name
  integer ( kind = 4 ) output_status
  integer ( kind = 4 ) output_unit
  character ( len = 30 ) string
  real ( kind = 8 ) table(m,n)
!
!  Open the file.
!
  call get_unit ( output_unit )

  open ( unit = output_unit, file = output_file_name, &
    status = 'replace', iostat = output_status )

  if ( output_status /= 0 ) then
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'R8MAT_WRITE - Fatal error!'
    write ( *, '(a,i8)' ) '  Could not open the output file "' // &
      trim ( output_file_name ) // '" on unit ', output_unit
    output_unit = -1
    stop
  end if
!
!  Create a format string.
!
!  For greater precision in the output file, try:
!
!                                            '(', m, 'g', 24, '.', 16, ')'
!
  write ( string, '(a1,i8,a1,i8,a1,i8,a1)' ) '(', m, 'g', 14, '.', 6, ')'
!
!  Write the data.
!
  do j = 1, n
    write ( output_unit, string ) table(1:m,j)
  end do
!
!  Close the file.
!
  close ( unit = output_unit )

  return
end
subroutine r8vec_print ( n, a, title )

!*****************************************************************************80
!
!! R8VEC_PRINT prints an R8VEC.
!
!  Discussion:
!
!    An R8VEC is a vector of R8's.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    22 August 2000
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, integer ( kind = 4 ) N, the number of components of the vector.
!
!    Input, real ( kind = 8 ) A(N), the vector to be printed.
!
!    Input, character ( len = * ) TITLE, a title.
!
  implicit none

  integer ( kind = 4 ) n

  real ( kind = 8 ) a(n)
  integer ( kind = 4 ) i
  character ( len = * ) title

  if ( 0 < len_trim ( title ) ) then
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) trim ( title )
  end if

  write ( *, '(a)' ) ' '
  do i = 1, n
    write ( *, '(2x,i8,2x,g16.8)' ) i, a(i)
  end do

  return
end
subroutine r8vec_variance ( n, a, variance )

!*****************************************************************************80
!
!! R8VEC_VARIANCE returns the variance of an R8VEC.
!
!  Discussion:
!
!    An R8VEC is a vector of R8's.
!
!    The variance of a vector X of length N is defined as
!
!      mean ( X(1:n) ) = sum ( X(1:n) ) / n
!
!      var ( X(1:n) ) = sum ( ( X(1:n) - mean )**2 ) / ( n - 1 )
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    14 February 1999
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, integer ( kind = 4 ) N, the number of entries in the vector.
!    N should be at least 2.
!
!    Input, real ( kind = 8 ) A(N), the vector.
!
!    Output, real ( kind = 8 ) VARIANCE, the variance of the vector.
!
  implicit none

  integer ( kind = 4 ) n

  real ( kind = 8 ) a(n)
  real ( kind = 8 ) mean
  real ( kind = 8 ) variance

  if ( n < 2 ) then

    variance = 0.0D+00

  else

    mean = sum ( a(1:n) ) / real ( n, kind = 8 )

    variance = sum ( ( a(1:n) - mean )**2 )

    variance = variance / real ( n - 1, kind = 8 )

  end if

  return
end
subroutine s_to_i4 ( s, ival, ierror, length )

!*****************************************************************************80
!
!! S_TO_I4 reads an I4 from a string.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license.
!
!  Modified:
!
!    28 June 2000
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) S, a string to be examined.
!
!    Output, integer ( kind = 4 ) IVAL, the integer value read from the string.
!    If the string is blank, then IVAL will be returned 0.
!
!    Output, integer ( kind = 4 ) IERROR, an error flag.
!    0, no error.
!    1, an error occurred.
!
!    Output, integer ( kind = 4 ) LENGTH, the number of characters of S
!    used to make IVAL.
!
  implicit none

  character              c
  integer ( kind = 4 ) i
  integer ( kind = 4 ) ierror
  integer ( kind = 4 ) isgn
  integer ( kind = 4 ) istate
  integer ( kind = 4 ) ival
  integer ( kind = 4 ) length
  character ( len = * )  s

  ierror = 0
  istate = 0
  isgn = 1
  ival = 0

  do i = 1, len_trim ( s )

    c = s(i:i)
!
!  Haven't read anything.
!
    if ( istate == 0 ) then

      if ( c == ' ' ) then

      else if ( c == '-' ) then
        istate = 1
        isgn = -1
      else if ( c == '+' ) then
        istate = 1
        isgn = + 1
      else if ( lle ( '0', c ) .and. lle ( c, '9' ) ) then
        istate = 2
        ival = ichar ( c ) - ichar ( '0' )
      else
        ierror = 1
        return
      end if
!
!  Have read the sign, expecting digits.
!
    else if ( istate == 1 ) then

      if ( c == ' ' ) then

      else if ( lle ( '0', c ) .and. lle ( c, '9' ) ) then
        istate = 2
        ival = ichar ( c ) - ichar ( '0' )
      else
        ierror = 1
        return
      end if
!
!  Have read at least one digit, expecting more.
!
    else if ( istate == 2 ) then

      if ( lle ( '0', c ) .and. lle ( c, '9' ) ) then
        ival = 10 * ival + ichar ( c ) - ichar ( '0' )
      else
        ival = isgn * ival
        length = i - 1
        return
      end if

    end if

  end do
!
!  If we read all the characters in the string, see if we're OK.
!
  if ( istate == 2 ) then
    ival = isgn * ival
    length = len_trim ( s )
  else
    ierror = 1
    length = 0
  end if

  return
end
subroutine s_to_i4vec ( s, n, ivec, ierror )

!*****************************************************************************80
!
!! S_TO_I4VEC reads an I4VEC from a string.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license.
!
!  Modified:
!
!    08 October 2003
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) S, the string to be read.
!
!    Input, integer ( kind = 4 ) N, the number of values expected.
!
!    Output, integer ( kind = 4 ) IVEC(N), the values read from the string.
!
!    Output, integer ( kind = 4 ) IERROR, error flag.
!    0, no errors occurred.
!    -K, could not read data for entries -K through N.
!
  implicit none

  integer ( kind = 4 ) n

  integer ( kind = 4 ) i
  integer ( kind = 4 ) ierror
  integer ( kind = 4 ) ilo
  integer ( kind = 4 ) ivec(n)
  integer ( kind = 4 ) length
  character ( len = * )  s

  i = 0
  ierror = 0
  ilo = 1

  do while ( i < n )

    i = i + 1

    call s_to_i4 ( s(ilo:), ivec(i), ierror, length )

    if ( ierror /= 0 ) then
      ierror = -i
      exit
    end if

    ilo = ilo + length

  end do

  return
end
subroutine s_to_r8 ( s, dval, ierror, length )

!*****************************************************************************80
!
!! S_TO_R8 reads an R8 from a string.
!
!  Discussion:
!
!    The routine will read as many characters as possible until it reaches
!    the end of the string, or encounters a character which cannot be
!    part of the number.
!
!    Legal input is:
!
!       1 blanks,
!       2 '+' or '-' sign,
!       2.5 blanks
!       3 integer part,
!       4 decimal point,
!       5 fraction part,
!       6 'E' or 'e' or 'D' or 'd', exponent marker,
!       7 exponent sign,
!       8 exponent integer part,
!       9 exponent decimal point,
!      10 exponent fraction part,
!      11 blanks,
!      12 final comma or semicolon,
!
!    with most quantities optional.
!
!  Example:
!
!    S                 DVAL
!
!    '1'               1.0
!    '     1   '       1.0
!    '1A'              1.0
!    '12,34,56'        12.0
!    '  34 7'          34.0
!    '-1E2ABCD'        -100.0
!    '-1X2ABCD'        -1.0
!    ' 2E-1'           0.2
!    '23.45'           23.45
!    '-4.2E+2'         -420.0
!    '17d2'            1700.0
!    '-14e-2'         -0.14
!    'e2'              100.0
!    '-12.73e-9.23'   -12.73 * 10.0^(-9.23)
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license.
!
!  Modified:
!
!    07 September 2004
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) S, the string containing the
!    data to be read.  Reading will begin at position 1 and
!    terminate at the end of the string, or when no more
!    characters can be read to form a legal real.  Blanks,
!    commas, or other nonnumeric data will, in particular,
!    cause the conversion to halt.
!
!    Output, real ( kind = 8 ) DVAL, the value read from the string.
!
!    Output, integer ( kind = 4 ) IERROR, error flag.
!    0, no errors occurred.
!    1, 2, 6 or 7, the input number was garbled.  The
!    value of IERROR is the last type of input successfully
!    read.  For instance, 1 means initial blanks, 2 means
!    a plus or minus sign, and so on.
!
!    Output, integer ( kind = 4 ) LENGTH, the number of characters read
!    to form the number, including any terminating
!    characters such as a trailing comma or blanks.
!
  implicit none

  character              c
  logical                ch_eqi
  real ( kind = 8 ) dval
  integer ( kind = 4 ) ierror
  integer ( kind = 4 ) ihave
  integer ( kind = 4 ) isgn
  integer ( kind = 4 ) iterm
  integer ( kind = 4 ) jbot
  integer ( kind = 4 ) jsgn
  integer ( kind = 4 ) jtop
  integer ( kind = 4 ) length
  integer ( kind = 4 ) nchar
  integer ( kind = 4 ) ndig
  real ( kind = 8 ) rbot
  real ( kind = 8 ) rexp
  real ( kind = 8 ) rtop
  character ( len = * )  s

  nchar = len_trim ( s )

  ierror = 0
  dval = 0.0D+00
  length = -1
  isgn = 1
  rtop = 0
  rbot = 1
  jsgn = 1
  jtop = 0
  jbot = 1
  ihave = 1
  iterm = 0

  do

    length = length + 1

    if ( nchar < length+1 ) then
      exit
    end if

    c = s(length+1:length+1)
!
!  Blank character.
!
    if ( c == ' ' ) then

      if ( ihave == 2 ) then

      else if ( ihave == 6 .or. ihave == 7 ) then
        iterm = 1
      else if ( 1 < ihave ) then
        ihave = 11
      end if
!
!  Comma.
!
    else if ( c == ',' .or. c == ';' ) then

      if ( ihave /= 1 ) then
        iterm = 1
        ihave = 12
        length = length + 1
      end if
!
!  Minus sign.
!
    else if ( c == '-' ) then

      if ( ihave == 1 ) then
        ihave = 2
        isgn = -1
      else if ( ihave == 6 ) then
        ihave = 7
        jsgn = -1
      else
        iterm = 1
      end if
!
!  Plus sign.
!
    else if ( c == '+' ) then

      if ( ihave == 1 ) then
        ihave = 2
      else if ( ihave == 6 ) then
        ihave = 7
      else
        iterm = 1
      end if
!
!  Decimal point.
!
    else if ( c == '.' ) then

      if ( ihave < 4 ) then
        ihave = 4
      else if ( 6 <= ihave .and. ihave <= 8 ) then
        ihave = 9
      else
        iterm = 1
      end if
!
!  Scientific notation exponent marker.
!
    else if ( ch_eqi ( c, 'E' ) .or. ch_eqi ( c, 'D' ) ) then

      if ( ihave < 6 ) then
        ihave = 6
      else
        iterm = 1
      end if
!
!  Digit.
!
    else if (  ihave < 11 .and. lle ( '0', c ) .and. lle ( c, '9' ) ) then

      if ( ihave <= 2 ) then
        ihave = 3
      else if ( ihave == 4 ) then
        ihave = 5
      else if ( ihave == 6 .or. ihave == 7 ) then
        ihave = 8
      else if ( ihave == 9 ) then
        ihave = 10
      end if

      call ch_to_digit ( c, ndig )

      if ( ihave == 3 ) then
        rtop = 10.0D+00 * rtop + real ( ndig, kind = 8 )
      else if ( ihave == 5 ) then
        rtop = 10.0D+00 * rtop + real ( ndig, kind = 8 )
        rbot = 10.0D+00 * rbot
      else if ( ihave == 8 ) then
        jtop = 10 * jtop + ndig
      else if ( ihave == 10 ) then
        jtop = 10 * jtop + ndig
        jbot = 10 * jbot
      end if
!
!  Anything else is regarded as a terminator.
!
    else
      iterm = 1
    end if
!
!  If we haven't seen a terminator, and we haven't examined the
!  entire string, go get the next character.
!
    if ( iterm == 1 ) then
      exit
    end if

  end do
!
!  If we haven't seen a terminator, and we have examined the
!  entire string, then we're done, and LENGTH is equal to NCHAR.
!
  if ( iterm /= 1 .and. length+1 == nchar ) then
    length = nchar
  end if
!
!  Number seems to have terminated.  Have we got a legal number?
!  Not if we terminated in states 1, 2, 6 or 7!
!
  if ( ihave == 1 .or. ihave == 2 .or. ihave == 6 .or. ihave == 7 ) then
    ierror = ihave
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'S_TO_R8 - Serious error!'
    write ( *, '(a)' ) '  Illegal or nonnumeric input:'
    write ( *, '(a)' ) '    ' // trim ( s )
    return
  end if
!
!  Number seems OK.  Form it.
!
  if ( jtop == 0 ) then
    rexp = 1.0D+00
  else
    if ( jbot == 1 ) then
      rexp = 10.0D+00 ** ( jsgn * jtop )
    else
      rexp = 10.0D+00 ** ( real ( jsgn * jtop, kind = 8 ) &
        / real ( jbot, kind = 8 ) )
    end if
  end if

  dval = real ( isgn, kind = 8 ) * rexp * rtop / rbot

  return
end
subroutine s_to_r8vec ( s, n, rvec, ierror )

!*****************************************************************************80
!
!! S_TO_R8VEC reads an R8VEC from a string.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license.
!
!  Modified:
!
!    07 September 2004
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) S, the string to be read.
!
!    Input, integer ( kind = 4 ) N, the number of values expected.
!
!    Output, real ( kind = 8 ) RVEC(N), the values read from the string.
!
!    Output, integer ( kind = 4 ) IERROR, error flag.
!    0, no errors occurred.
!    -K, could not read data for entries -K through N.
!
  implicit none

  integer ( kind = 4 ) n

  integer ( kind = 4 ) i
  integer ( kind = 4 ) ierror
  integer ( kind = 4 ) ilo
  integer ( kind = 4 ) lchar
  real ( kind = 8 ) rvec(n)
  character ( len = * )  s

  i = 0
  ierror = 0
  ilo = 1

  do while ( i < n )

    i = i + 1

    call s_to_r8 ( s(ilo:), rvec(i), ierror, lchar )

    if ( ierror /= 0 ) then
      ierror = -i
      exit
    end if

    ilo = ilo + lchar

  end do

  return
end
subroutine s_word_count ( s, nword )

!*****************************************************************************80
!
!! S_WORD_COUNT counts the number of "words" in a string.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    14 April 1999
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) S, the string to be examined.
!
!    Output, integer ( kind = 4 ) NWORD, the number of "words" in the string.
!    Words are presumed to be separated by one or more blanks.
!
  implicit none

  logical                blank
  integer ( kind = 4 ) i
  integer ( kind = 4 ) lens
  integer ( kind = 4 ) nword
  character ( len = * ) s

  nword = 0
  lens = len ( s )

  if ( lens <= 0 ) then
    return
  end if

  blank = .true.

  do i = 1, lens

    if ( s(i:i) == ' ' ) then
      blank = .true.
    else if ( blank ) then
      nword = nword + 1
      blank = .false.
    end if

  end do

  return
end
subroutine tetrahedron_volume ( tetra, volume )

!*****************************************************************************80
!
!! TETRAHEDRON_VOLUME_3D computes the volume of a tetrahedron.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    30 December 2004
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, real ( kind = 8 ) TETRA(3,4), the vertices of the tetrahedron.
!
!    Output, real ( kind = 8 ) VOLUME, the volume of the tetrahedron.
!
  implicit none

  integer ( kind = 4 ), parameter :: dim_num = 3

  real ( kind = 8 ) a(4,4)
  real ( kind = 8 ) r8mat_det_4d
  real ( kind = 8 ) tetra(dim_num,4)
  real ( kind = 8 ) volume

  a(1:dim_num,1:4) = tetra(1:dim_num,1:4)
  a(4,1:4) = 1.0D+00

  volume = abs ( r8mat_det_4d ( a ) ) / 6.0D+00

  return
end
subroutine timestamp ( )

!*****************************************************************************80
!
!! TIMESTAMP prints the current YMDHMS date as a time stamp.
!
!  Example:
!
!    31 May 2001   9:45:54.872 AM
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license.
!
!  Modified:
!
!    18 May 2013
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    None
!
  implicit none

  character ( len = 8 ) ampm
  integer ( kind = 4 ) d
  integer ( kind = 4 ) h
  integer ( kind = 4 ) m
  integer ( kind = 4 ) mm
  character ( len = 9 ), parameter, dimension(12) :: month = (/ &
    'January  ', 'February ', 'March    ', 'April    ', &
    'May      ', 'June     ', 'July     ', 'August   ', &
    'September', 'October  ', 'November ', 'December ' /)
  integer ( kind = 4 ) n
  integer ( kind = 4 ) s
  integer ( kind = 4 ) values(8)
  integer ( kind = 4 ) y

  call date_and_time ( values = values )

  y = values(1)
  m = values(2)
  d = values(3)
  h = values(5)
  n = values(6)
  s = values(7)
  mm = values(8)

  if ( h < 12 ) then
    ampm = 'AM'
  else if ( h == 12 ) then
    if ( n == 0 .and. s == 0 ) then
      ampm = 'Noon'
    else
      ampm = 'PM'
    end if
  else
    h = h - 12
    if ( h < 12 ) then
      ampm = 'PM'
    else if ( h == 12 ) then
      if ( n == 0 .and. s == 0 ) then
        ampm = 'Midnight'
      else
        ampm = 'AM'
      end if
    end if
  end if

  write ( *, '(i2,1x,a,1x,i4,2x,i2,a1,i2.2,a1,i2.2,a1,i3.3,1x,a)' ) &
    d, trim ( month(m) ), y, h, ':', n, ':', s, '.', mm, trim ( ampm )

  return
end