program main

!*****************************************************************************80
!
!! MAIN is the main program for MESH_BANDWIDTH.
!
!  Discussion:
!
!    MESH_BANDWIDTH determines the geometric bandwidth of a mesh of elements.
!
!    The user supplies an element file, listing the indices of the nodes that
!    make up each element.
!
!    The program computes the geometric bandwidth associated with the mesh.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    10 November 2011
!
!  Author:
!
!    John Burkardt
!
!  Usage:
!
!    mesh_bandwidth element_file
!
  implicit none

  integer ( kind = 4 ) arg_num
  character ( len = 255 ) :: element_file_name = ' '
  integer ( kind = 4 ), allocatable, dimension ( :, : ) :: element_node
  integer ( kind = 4 ) element_num
  integer ( kind = 4 ) element_order
  logical header
  integer ( kind = 4 ) i
  integer ( kind = 4 ) iarg
  integer ( kind = 4 ) iargc
  integer ( kind = 4 ) j
  integer ( kind = 4 ) m
  integer ( kind = 4 ) ml
  integer ( kind = 4 ) mu

  call timestamp ( )

  write ( *, '(a)' ) ' '
  write ( *, '(a)' ) 'MESH_BANDWIDTH'
  write ( *, '(a)' ) '  FORTRAN90 version'
  write ( *, '(a)' ) '  Read a mesh file which defines'
  write ( *, '(a)' ) '  a "triangulation" of a region in the plane,'
  write ( *, '(a)' ) '  or a "tetrahedronization" of a region in space,'
  write ( *, '(a)' ) '  or any division of a regino in ND space into elements,'
  write ( *, '(a)' ) '  using a mesh of elements of uniform order.'
  write ( *, '(a)' ) ' '
  write ( *, '(a)' ) '  Determine the geometric mesh bandwidth.'
  write ( *, '(a)' ) ' '
  write ( *, '(a)' ) '    M = ML + 1 + MU.'
  write ( *, '(a)' ) ' '
  write ( *, '(a)' ) '  which is the bandwidth of the vertex connectivity'
  write ( *, '(a)' ) '  matrix.'
  write ( *, '(a)' ) ' '
  write ( *, '(a)' ) '  Note that a matrix associated with variables defined'
  write ( *, '(a)' ) '  at the  nodes could have a greater bandwidth than M,'
  write ( *, '(a)' ) '  since you might have multiple variables at a vertex,'
  write ( *, '(a)' ) '  or the variable might be a vector quantity,'
  write ( *, '(a)' ) '  or physical effects might link two variables that are'
  write ( *, '(a)' ) '  not associated with vertices that are connected.'
!
!  Get the number of command line arguments.
!
  arg_num = iargc ( )
!
!  If at least one command line argument, it's the element file.
!
  if ( 1 <= arg_num ) then

    iarg = 1
    call getarg ( iarg, element_file_name )

  else

    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'MESH_BANDWIDTH'
    write ( *, '(a)' ) '  Please enter the name of the element file.'

    read ( *, '(a)' ) element_file_name

  end if
!
!  Read the triangulation data.
!
  call i4mat_header_read (  element_file_name, element_order, element_num )

  write ( *, '(a)' ) ' '
  write ( *, '(a)' ) '  Read the header of "' &
    // trim ( element_file_name ) //'".'
  write ( *, '(a)' ) ' '
  write ( *, '(a,i8)' ) '  Element order ELEMENT_ORDER = ', element_order
  write ( *, '(a,i8)' ) '  Element number ELEMENT_NUM  = ', element_num

  allocate ( element_node(1:element_order,1:element_num) )

  call i4mat_data_read ( element_file_name, element_order, element_num, &
    element_node )

  write ( *, '(a)' ) ' '
  write ( *, '(a)' ) '  Read the data in "' &
    // trim ( element_file_name ) //'".'

  call i4mat_transpose_print_some ( element_order, element_num, element_node, &
    1, 1, element_order, 5, '  First 5 elements:' )
!
!  Compute the bandwidth.
!
  call bandwidth_mesh ( element_order, element_num, element_node, ml, mu, m )

  write ( *, '(a)' ) ' '
  write ( *, '(a,i8)' ) '  Lower bandwidth ML = ', ml
  write ( *, '(a,i8)' ) '  Upper bandwidth MU = ', mu
  write ( *, '(a,i8)' ) '  Total bandwidth M  = ', m
!
!  Free memory.
!
  deallocate ( element_node )
!
!  Terminate.
!
  write ( *, '(a)' ) ' '
  write ( *, '(a)' ) 'MESH_BANDWIDTH'
  write ( *, '(a)' ) '  Normal end of execution.'

  write ( *, '(a)' ) ' '
  call timestamp ( )

  stop
end
subroutine bandwidth_mesh ( element_order, element_num, element_node, &
  ml, mu, m )

!*****************************************************************************80
!
!! BANDWIDTH_MESH determines the bandwidth of a finite element mesh.
!
!  Discussion:
!
!    The quantity computed here is the "geometric" bandwidth determined
!    by the finite element mesh alone.
!
!    If a single finite element variable is associated with each node
!    of the mesh, and if the nodes and variables are numbered in the
!    same way, then the geometric bandwidth is the same as the bandwidth
!    of a typical finite element matrix.
!
!    The bandwidth M is defined in terms of the lower and upper bandwidths:
!
!      M = ML + 1 + MU
!
!    where
!
!      ML = maximum distance from any diagonal entry to a nonzero
!      entry in the same row, but earlier column,
!
!      MU = maximum distance from any diagonal entry to a nonzero
!      entry in the same row, but later column.
!
!    Because the finite element node adjacency relationship is symmetric,
!    we are guaranteed that ML = MU.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    02 September 2006
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, integer ( kind = 4 ) ELEMENT_ORDER, the order of the elements.
!
!    Input, integer ( kind = 4 ) ELEMENT_NUM, the number of elements.
!
!    Input, integer ( kind = 4 ) ELEMENT_NODE(ELEMENT_ORDER,ELEMENT_NUM);
!    ELEMENT_NODE(I,J) is the global index of local node I in element J.
!
!    Output, integer ( kind = 4 ) ML, MU, the lower and upper bandwidths 
!    of the matrix.
!
!    Output, integer ( kind = 4 ) M, the bandwidth of the matrix.
!
  implicit none

  integer ( kind = 4 ) element_num
  integer ( kind = 4 ) element_order

  integer ( kind = 4 ) element
  integer ( kind = 4 ) element_node(element_order,element_num)
  integer ( kind = 4 ) global_i
  integer ( kind = 4 ) global_j
  integer ( kind = 4 ) local_i
  integer ( kind = 4 ) local_j
  integer ( kind = 4 ) m
  integer ( kind = 4 ) ml
  integer ( kind = 4 ) mu

  ml = 0
  mu = 0

  do element = 1, element_num

    do local_i = 1, element_order
      global_i = element_node(local_i,element)

      do local_j = 1, element_order
        global_j = element_node(local_j,element)

        mu = max ( mu, global_j - global_i )
        ml = max ( ml, global_i - global_j )

      end do
    end do
  end do

  m = ml + 1 + mu

  return
end
subroutine file_column_count ( input_filename, column_num )

!*****************************************************************************80
!
!! FILE_COLUMN_COUNT counts the number of columns in the first line of a file.
!
!  Discussion:
!
!    The file is assumed to be a simple text file.
!
!    Most lines of the file is presumed to consist of COLUMN_NUM words,
!    separated by spaces.  There may also be some blank lines, and some 
!    comment lines,
!    which have a "#" in column 1.
!
!    The routine tries to find the first non-comment non-blank line and
!    counts the number of words in that line.
!
!    If all lines are blanks or comments, it goes back and tries to analyze
!    a comment line.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    21 June 2001
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) INPUT_FILENAME, the name of the file.
!
!    Output, integer ( kind = 4 ) COLUMN_NUM, the number of columns in the file.
!
  implicit none

  integer ( kind = 4 ) column_num
  logical got_one
  character ( len = * ) input_filename
  integer ( kind = 4 ) input_status
  integer ( kind = 4 ) input_unit
  character ( len = 255 ) line
!
!  Open the file.
!
  call get_unit ( input_unit )

  open ( unit = input_unit, file = input_filename, status = 'old', &
    form = 'formatted', access = 'sequential', iostat = input_status )

  if ( input_status /= 0 ) then
    column_num = -1
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'FILE_COLUMN_COUNT - Fatal error!'
    write ( *, '(a)' ) '  Could not open the file:'
    write ( *, '(a)' ) '    ' // trim ( input_filename )
    return
  end if
!
!  Read one line, but skip blank lines and comment lines.
!
  got_one = .false.

  do

    read ( input_unit, '(a)', iostat = input_status ) line

    if ( input_status /= 0 ) then
      exit
    end if

    if ( len_trim ( line ) == 0 ) then
      cycle
    end if

    if ( line(1:1) == '#' ) then
      cycle
    end if

    got_one = .true.
    exit

  end do

  if ( .not. got_one ) then

    rewind ( input_unit )

    do

      read ( input_unit, '(a)', iostat = input_status ) line

      if ( input_status /= 0 ) then
        exit
      end if

      if ( len_trim ( line ) == 0 ) then
        cycle
      end if

      got_one = .true.
      exit

    end do

  end if

  close ( unit = input_unit )

  if ( .not. got_one ) then
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'FILE_COLUMN_COUNT - Warning!'
    write ( *, '(a)' ) '  The file does not seem to contain any data.'
    column_num = -1
    return
  end if

  call s_word_count ( line, column_num )

  return
end
subroutine file_row_count ( input_filename, row_num )

!*****************************************************************************80
!
!! FILE_ROW_COUNT counts the number of row records in a file.
!
!  Discussion:
!
!    It does not count lines that are blank, or that begin with a
!    comment symbol '#'.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    06 March 2003
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) INPUT_FILENAME, the name of the input file.
!
!    Output, integer ( kind = 4 ) ROW_NUM, the number of rows found.
!
  implicit none

  integer ( kind = 4 ) bad_num
  integer ( kind = 4 ) comment_num
  integer ( kind = 4 ) ierror
  character ( len = * ) input_filename
  integer ( kind = 4 ) input_status
  integer ( kind = 4 ) input_unit
  character ( len = 255 ) line
  integer ( kind = 4 ) record_num
  integer ( kind = 4 ) row_num

  call get_unit ( input_unit )

  open ( unit = input_unit, file = input_filename, status = 'old', &
    iostat = input_status )

  if ( input_status /= 0 ) then
    row_num = -1;
    ierror = 1
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'FILE_ROW_COUNT - Fatal error!'
    write ( *, '(a)' ) '  Could not open the input file: ' // &
      trim ( input_filename )
    stop
  end if

  comment_num = 0
  row_num = 0
  record_num = 0
  bad_num = 0

  do

    read ( input_unit, '(a)', iostat = input_status ) line

    if ( input_status /= 0 ) then
      ierror = record_num
      exit
    end if

    record_num = record_num + 1

    if ( line(1:1) == '#' ) then
      comment_num = comment_num + 1
      cycle
    end if

    if ( len_trim ( line ) == 0 ) then
      comment_num = comment_num + 1
      cycle
    end if

    row_num = row_num + 1

  end do

  close ( unit = input_unit )

  return
end
subroutine get_unit ( iunit )

!*****************************************************************************80
!
!! GET_UNIT returns a free FORTRAN unit number.
!
!  Discussion:
!
!    A "free" FORTRAN unit number is a value between 1 and 99 which
!    is not currently associated with an I/O device.  A free FORTRAN unit
!    number is needed in order to open a file with the OPEN command.
!
!    If IUNIT = 0, then no free FORTRAN unit could be found, although
!    all 99 units were checked (except for units 5, 6 and 9, which
!    are commonly reserved for console I/O).
!
!    Otherwise, IUNIT is a value between 1 and 99, representing a
!    free FORTRAN unit.  Note that GET_UNIT assumes that units 5 and 6
!    are special, and will never return those values.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    18 September 2005
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Output, integer ( kind = 4 ) IUNIT, the free unit number.
!
  implicit none

  integer ( kind = 4 ) i
  integer ( kind = 4 ) ios
  integer ( kind = 4 ) iunit
  logical lopen

  iunit = 0

  do i = 1, 99

    if ( i /= 5 .and. i /= 6 .and. i /= 9 ) then

      inquire ( unit = i, opened = lopen, iostat = ios )

      if ( ios == 0 ) then
        if ( .not. lopen ) then
          iunit = i
          return
        end if
      end if

    end if

  end do

  return
end
subroutine i4mat_data_read ( input_filename, m, n, table )

!*****************************************************************************80
!
!! I4MAT_DATA_READ reads data from an I4MAT file.
!
!  Discussion:
!
!    An I4MAT is an array of I4's.
!
!    The file may contain more than N points, but this routine
!    will return after reading N points.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license.
!
!  Modified:
!
!    27 January 2005
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) INPUT_FILENAME, the name of the input file.
!
!    Input, integer ( kind = 4 ) M, the spatial dimension.
!
!    Input, integer ( kind = 4 ) N, the number of points.
!
!    Output, integer ( kind = 4 ) TABLE(M,N), the data.
!
  implicit none

  integer ( kind = 4 ) m
  integer ( kind = 4 ) n

  integer ( kind = 4 ) ierror
  character ( len = * ) input_filename
  integer ( kind = 4 ) input_status
  integer ( kind = 4 ) input_unit
  integer ( kind = 4 ) j
  character ( len = 255 ) line
  integer ( kind = 4 ) table(m,n)
  integer ( kind = 4 ) x(m)

  ierror = 0

  call get_unit ( input_unit )

  open ( unit = input_unit, file = input_filename, status = 'old', &
    iostat = input_status )

  if ( input_status /= 0 ) then
    ierror = 1
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'I4MAT_DATA_READ - Fatal error!'
    write ( *, '(a,i8)' ) '  Could not open the input file "' // &
      trim ( input_filename ) // '" on unit ', input_unit
    stop
  end if

  j = 0

  do while ( j < n )

    read ( input_unit, '(a)', iostat = input_status ) line

    if ( input_status /= 0 ) then
      ierror = 2
      write ( *, '(a)' ) ' '
      write ( *, '(a)' ) 'I4MAT_DATA_READ - Fatal error!'
      write ( *, '(a)' ) '  Error while reading lines of data.'
      write ( *, '(a,i8)' ) '  Number of values expected per line M = ', m
      write ( *, '(a,i8)' ) '  Number of data lines read, J =         ', j
      write ( *, '(a,i8)' ) '  Number of data lines needed, N =       ', n
      stop
    end if

    if ( line(1:1) == '#' .or. len_trim ( line ) == 0 ) then
      cycle
    end if

    call s_to_i4vec ( line, m, x, ierror )

    if ( ierror /= 0 ) then
      cycle
    end if

    j = j + 1

    table(1:m,j) = x(1:m)

  end do

  close ( unit = input_unit )

  return
end
subroutine i4mat_header_read ( input_filename, m, n )

!*****************************************************************************80
!
!! I4MAT_HEADER_READ reads the header from an I4MAT.
!
!  Discussion:
!
!    An I4MAT is an array of I4's.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license.
!
!  Modified:
!
!    04 June 2004
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) INPUT_FILENAME, the name of the input file.
!
!    Output, integer ( kind = 4 ) M, spatial dimension.
!
!    Output, integer ( kind = 4 ) N, the number of points.
!
  implicit none

  character ( len = * ) input_filename
  integer ( kind = 4 ) m
  integer ( kind = 4 ) n

  call file_column_count ( input_filename, m )

  if ( m <= 0 ) then
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'I4MAT_HEADER_READ - Fatal error!'
    write ( *, '(a)' ) '  There was some kind of I/O problem while trying'
    write ( *, '(a)' ) '  to count the number of data columns in'
    write ( *, '(a)' ) '  the file "' // trim ( input_filename ) // '".'
    stop
  end if

  call file_row_count ( input_filename, n )

  if ( n <= 0 ) then
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'I4MAT_HEADER_READ - Fatal error!'
    write ( *, '(a)' ) '  There was some kind of I/O problem while trying'
    write ( *, '(a)' ) '  to count the number of data rows in'
    write ( *, '(a)' ) '  the file "' // trim ( input_filename ) // '".'
    stop
  end if

  return
end
subroutine i4mat_transpose_print_some ( m, n, a, ilo, jlo, ihi, jhi, title )

!*****************************************************************************80
!
!! I4MAT_TRANSPOSE_PRINT_SOME prints some of the transpose of an I4MAT.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    09 February 2005
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, integer ( kind = 4 ) M, N, the number of rows and columns.
!
!    Input, integer ( kind = 4 ) A(M,N), an M by N matrix to be printed.
!
!    Input, integer ( kind = 4 ) ILO, JLO, the first row and column to print.
!
!    Input, integer ( kind = 4 ) IHI, JHI, the last row and column to print.
!
!    Input, character ( len = * ) TITLE, a title.
!
  implicit none

  integer ( kind = 4 ), parameter :: incx = 10
  integer ( kind = 4 ) m
  integer ( kind = 4 ) n

  integer ( kind = 4 ) a(m,n)
  character ( len = 7 ) ctemp(incx)
  integer ( kind = 4 ) i
  integer ( kind = 4 ) i2
  integer ( kind = 4 ) i2hi
  integer ( kind = 4 ) i2lo
  integer ( kind = 4 ) ihi
  integer ( kind = 4 ) ilo
  integer ( kind = 4 ) inc
  integer ( kind = 4 ) j
  integer ( kind = 4 ) j2hi
  integer ( kind = 4 ) j2lo
  integer ( kind = 4 ) jhi
  integer ( kind = 4 ) jlo
  character ( len = * ) title

  write ( *, '(a)' ) ' '
  write ( *, '(a)' ) trim ( title )

  do i2lo = max ( ilo, 1 ), min ( ihi, m ), incx

    i2hi = i2lo + incx - 1
    i2hi = min ( i2hi, m )
    i2hi = min ( i2hi, ihi )

    inc = i2hi + 1 - i2lo

    write ( *, '(a)' ) ' '

    do i = i2lo, i2hi
      i2 = i + 1 - i2lo
      write ( ctemp(i2), '(i7)') i
    end do

    write ( *, '(''  Row '',10a7)' ) ctemp(1:inc)
    write ( *, '(a)' ) '  Col'
    write ( *, '(a)' ) ' '

    j2lo = max ( jlo, 1 )
    j2hi = min ( jhi, n )

    do j = j2lo, j2hi

      do i2 = 1, inc

        i = i2lo - 1 + i2

        write ( ctemp(i2), '(i7)' ) a(i,j)

      end do

      write ( *, '(i5,1x,10a7)' ) j, ( ctemp(i), i = 1, inc )

    end do

  end do

  return
end
subroutine s_to_i4 ( s, ival, ierror, length )

!*****************************************************************************80
!
!! S_TO_I4 reads an I4 from a string.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    28 June 2000
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) S, a string to be examined.
!
!    Output, integer ( kind = 4 ) IVAL, the value read from the string.
!    If the string is blank, then IVAL will be returned 0.
!
!    Output, integer ( kind = 4 ) IERROR, an error flag.
!    0, no error.
!    1, an error occurred.
!
!    Output, integer ( kind = 4 ) LENGTH, the number of characters
!    used to make IVAL.
!
  implicit none

  character c
  integer ( kind = 4 ) i
  integer ( kind = 4 ) ierror
  integer ( kind = 4 ) isgn
  integer ( kind = 4 ) istate
  integer ( kind = 4 ) ival
  integer ( kind = 4 ) length
  character ( len = * ) s

  ierror = 0
  istate = 0
  isgn = 1
  ival = 0

  do i = 1, len_trim ( s )

    c = s(i:i)
!
!  Haven't read anything.
!
    if ( istate == 0 ) then

      if ( c == ' ' ) then

      else if ( c == '-' ) then
        istate = 1
        isgn = -1
      else if ( c == '+' ) then
        istate = 1
        isgn = + 1
      else if ( lle ( '0', c ) .and. lle ( c, '9' ) ) then
        istate = 2
        ival = ichar ( c ) - ichar ( '0' )
      else
        ierror = 1
        return
      end if
!
!  Have read the sign, expecting digits.
!
    else if ( istate == 1 ) then

      if ( c == ' ' ) then

      else if ( lle ( '0', c ) .and. lle ( c, '9' ) ) then
        istate = 2
        ival = ichar ( c ) - ichar ( '0' )
      else
        ierror = 1
        return
      end if
!
!  Have read at least one digit, expecting more.
!
    else if ( istate == 2 ) then

      if ( lle ( '0', c ) .and. lle ( c, '9' ) ) then
        ival = 10 * ival + ichar ( c ) - ichar ( '0' )
      else
        ival = isgn * ival
        length = i - 1
        return
      end if

    end if

  end do
!
!  If we read all the characters in the string, see if we're OK.
!
  if ( istate == 2 ) then
    ival = isgn * ival
    length = len_trim ( s )
  else
    ierror = 1
    length = 0
  end if

  return
end
subroutine s_to_i4vec ( s, n, ivec, ierror )

!*****************************************************************************80
!
!! S_TO_I4VEC reads an I4VEC from a string.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    08 October 2003
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) S, the string to be read.
!
!    Input, integer ( kind = 4 ) N, the number of values expected.
!
!    Output, integer ( kind = 4 ) IVEC(N), the values read from the string.
!
!    Output, integer ( kind = 4 ) IERROR, error flag.
!    0, no errors occurred.
!    -K, could not read data for entries -K through N.
!
  implicit none

  integer ( kind = 4 ) n

  integer ( kind = 4 ) i
  integer ( kind = 4 ) ierror
  integer ( kind = 4 ) ilo
  integer ( kind = 4 ) ivec(n)
  integer ( kind = 4 ) length
  character ( len = * ) s

  i = 0
  ierror = 0
  ilo = 1

  do while ( i < n )

    i = i + 1

    call s_to_i4 ( s(ilo:), ivec(i), ierror, length )

    if ( ierror /= 0 ) then
      ierror = -i
      exit
    end if

    ilo = ilo + length

  end do

  return
end
subroutine s_word_count ( s, nword )

!*****************************************************************************80
!
!! S_WORD_COUNT counts the number of "words" in a string.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    14 April 1999
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) S, the string to be examined.
!
!    Output, integer ( kind = 4 ) NWORD, the number of "words" in the string.
!    Words are presumed to be separated by one or more blanks.
!
  implicit none

  logical blank
  integer ( kind = 4 ) i
  integer ( kind = 4 ) lens
  integer ( kind = 4 ) nword
  character ( len = * ) s

  nword = 0
  lens = len ( s )

  if ( lens <= 0 ) then
    return
  end if

  blank = .true.

  do i = 1, lens

    if ( s(i:i) == ' ' ) then
      blank = .true.
    else if ( blank ) then
      nword = nword + 1
      blank = .false.
    end if

  end do

  return
end
subroutine timestamp ( )

!*****************************************************************************80
!
!! TIMESTAMP prints the current YMDHMS date as a time stamp.
!
!  Example:
!
!    31 May 2001   9:45:54.872 AM
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license.
!
!  Modified:
!
!    18 May 2013
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    None
!
  implicit none

  character ( len = 8 ) ampm
  integer ( kind = 4 ) d
  integer ( kind = 4 ) h
  integer ( kind = 4 ) m
  integer ( kind = 4 ) mm
  character ( len = 9 ), parameter, dimension(12) :: month = (/ &
    'January  ', 'February ', 'March    ', 'April    ', &
    'May      ', 'June     ', 'July     ', 'August   ', &
    'September', 'October  ', 'November ', 'December ' /)
  integer ( kind = 4 ) n
  integer ( kind = 4 ) s
  integer ( kind = 4 ) values(8)
  integer ( kind = 4 ) y

  call date_and_time ( values = values )

  y = values(1)
  m = values(2)
  d = values(3)
  h = values(5)
  n = values(6)
  s = values(7)
  mm = values(8)

  if ( h < 12 ) then
    ampm = 'AM'
  else if ( h == 12 ) then
    if ( n == 0 .and. s == 0 ) then
      ampm = 'Noon'
    else
      ampm = 'PM'
    end if
  else
    h = h - 12
    if ( h < 12 ) then
      ampm = 'PM'
    else if ( h == 12 ) then
      if ( n == 0 .and. s == 0 ) then
        ampm = 'Midnight'
      else
        ampm = 'AM'
      end if
    end if
  end if

  write ( *, '(i2.2,1x,a,1x,i4,2x,i2,a1,i2.2,a1,i2.2,a1,i3.3,1x,a)' ) &
    d, trim ( month(m) ), y, h, ':', n, ':', s, '.', mm, trim ( ampm )

  return
end