subroutine ch_cap ( c )

!*****************************************************************************80
!
!! CH_CAP capitalizes a single character.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    19 July 1998
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input/output, character C, the character to capitalize.
!
  implicit none

  character c
  integer ( kind = 4 ) itemp

  itemp = ichar ( c )

  if ( 97 <= itemp .and. itemp <= 122 ) then
    c = char ( itemp - 32 )
  end if

  return
end
function ch_eqi ( c1, c2 )

!*****************************************************************************80
!
!! CH_EQI is a case insensitive comparison of two characters for equality.
!
!  Example:
!
!    CH_EQI ( 'A', 'a' ) is .TRUE.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    28 July 2000
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character C1, C2, the characters to compare.
!
!    Output, logical CH_EQI, the result of the comparison.
!
  implicit none

  logical ch_eqi
  character c1
  character c1_cap
  character c2
  character c2_cap

  c1_cap = c1
  c2_cap = c2

  call ch_cap ( c1_cap )
  call ch_cap ( c2_cap )

  if ( c1_cap == c2_cap ) then
    ch_eqi = .true.
  else
    ch_eqi = .false.
  end if

  return
end
subroutine ch_to_digit ( c, digit )

!*****************************************************************************80
!
!! CH_TO_DIGIT returns the value of a base 10 digit.
!
!  Example:
!
!     C   DIGIT
!    ---  -----
!    '0'    0
!    '1'    1
!    ...  ...
!    '9'    9
!    ' '    0
!    'X'   -1
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    04 August 1999
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character C, the decimal digit, '0' through '9' or blank
!    are legal.
!
!    Output, integer ( kind = 4 ) DIGIT, the corresponding value.  If C was
!    'illegal', then DIGIT is -1.
!
  implicit none

  character c
  integer ( kind = 4 ) digit

  if ( lge ( c, '0' ) .and. lle ( c, '9' ) ) then

    digit = ichar ( c ) - 48

  else if ( c == ' ' ) then

    digit = 0

  else

    digit = -1

  end if

  return
end
subroutine cvt_fixed_iteration ( m, n, sample_num, fixed, seed, generator, &
  diff )

!******************************************************************************
!
!! CVT_FIXED_ITERATION takes one step of the CVT iteration.
!
!  Discussion:
!
!    In this version of the routine, some generators are fixed and
!    may not be updated.
!
!    The routine is given a set of points, called "generators", which
!    define a tessellation of the region into Voronoi cells.  Each point
!    defines a cell.  Each cell, in turn, has a centroid, but it is
!    unlikely that the centroid and the generator coincide.
!
!    Each time this CVT iteration is carried out, an attempt is made
!    to modify the generators in such a way that they are closer and
!    closer to being the centroids of the Voronoi cells they generate.
!
!    A large number of sample points are generated, and the nearest generator
!    is determined.  A count is kept of how many points were nearest to each
!    generator.  Once the sampling is completed, the centroids are computed.
!
!    If this routine is called in a loop, the centroids from the previous
!    step should be input as the generators for the next step.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    14 December 2003
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, integer ( kind = 4 ) M, the spatial dimension.
!
!    Input, integer ( kind = 4 ) N, the number of Voronoi cells.
!
!    Input, integer ( kind = 4 ) SAMPLE_NUM, the number of sample points.
!
!    Input, logical FIXED(N), indicates whether a generator is fixed.
!
!    Input/output, integer ( kind = 4 ) SEED, a seed for the random 
!    number generator.
!
!    Input/output, real ( kind = 8 ) GENERATOR(M,N), the Voronoi
!    cell generators.
!
  implicit none

  integer ( kind = 4 ) m
  integer ( kind = 4 ) n

  integer ( kind = 4 ) count(n)
  real ( kind = 8 ) diff
  logical fixed(n)
  real ( kind = 8 ) generator(m,n)
  real ( kind = 8 ) generator2(m,n)
  integer ( kind = 4 ) j
  integer ( kind = 4 ) nearest
  integer ( kind = 4 ) sample_num
  integer ( kind = 4 ) seed
  real ( kind = 8 ) x(m)

  generator2(1:m,1:n) = 0.0D+00
  count(1:n) = 0

  do j = 1, sample_num

    call region_sample ( m, 1, seed, x )
!
!  Find the nearest cell generator.
!
    call find_closest ( m, n, x, generator, nearest )
!
!  Add X to the averaging data for GENERATOR(*,NEAREST).
!
    if ( nearest < 1 .or. n < nearest ) then
      write ( *, '(a)' ) ' '
      write ( *, '(a)' ) 'CVT_CONSTRAINED_ITERATION - Fatal error!'
      write ( *, '(a,i6)' ) 'NEAREST = ',nearest
      stop
    end if

    generator2(1:m,nearest) = generator2(1:m,nearest) + x(1:m)

    count(nearest) = count(nearest) + 1

  end do

  diff = 0.0D+00

  do j = 1, n

    if ( count(j) /= 0 ) then
      generator2(1:m,j) = generator2(1:m,j) / real ( count(j), kind = 8 )
    end if

    if ( ( .not. fixed(j) ) .and. count(j) /= 0 ) then
      diff = diff + sqrt ( sum ( ( generator(1:m,j) - generator2(1:m,j) )**2 ) )
      generator(1:m,j) = generator2(1:m,j)
    end if

  end do

  return
end
subroutine dtable_data_read ( input_filename, m, n, table )

!*****************************************************************************80
!
!! DTABLE_DATA_READ reads real table data from a file.
!
!  Discussion:
!
!    The file may contain more than N points, but this routine will
!    return after reading N of them.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    08 October 2003
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) INPUT_FILENAME, the name of the input file.
!
!    Input, integer ( kind = 4 ) M, the spatial dimension.
!
!    Input, integer ( kind = 4 ) N, the number of points.
!
!    Output, real ( kind = 8 ) TABLE(M,N), the table data.
!
  implicit none

  integer ( kind = 4 ) m
  integer ( kind = 4 ) n

  integer ( kind = 4 ) i
  integer ( kind = 4 ) ierror
  character ( len = * ) input_filename
  integer ( kind = 4 ) input_unit
  integer ( kind = 4 ) ios
  character ( len = 255 ) line
  real ( kind = 8 ) table(m,n)
  real ( kind = 8 ) x(m)

  call get_unit ( input_unit )

  open ( unit = input_unit, file = input_filename, status = 'old', &
    iostat = ios )

  if ( ios /= 0 ) then
    ierror = 1
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'DTABLE_DATA_READ - Fatal error!'
    write ( *, '(a)' ) '  Could not open the input file: ' // &
      trim ( input_filename )
    stop
  end if

  i = 0

  do while ( i < n )

    read ( input_unit, '(a)', iostat = ios ) line

    if ( ios /= 0 ) then
      ierror = i
      exit
    end if

    if ( line(1:1) == '#' .or. len_trim ( line ) == 0 ) then
      cycle
    end if

    call s_to_r8vec ( line, m, x, ierror )

    if ( ierror /= 0 ) then
      cycle
    end if

    i = i + 1

    table(1:m,i) = x(1:m)

  end do

  close ( unit = input_unit )

  return
end
subroutine dtable_data_write ( output_unit, m, n, table )

!*****************************************************************************80
!
!! DTABLE_DATA_WRITE writes a real table dataset to a file.
!
!  Discussion:
!
!    This routine writes a single line of output for each point,
!    containing its spatial coordinates.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    08 October 2003
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, integer ( kind = 4 ) OUTPUT_UNIT, the output unit.
!
!    Input, integer ( kind = 4 ) M, the spatial dimension.
!
!    Input, integer ( kind = 4 ) N, the number of points.
!
!    Input, real ( kind = 8 ) TABLE(M,N), the table data.
!
  implicit none

  integer ( kind = 4 ) m
  integer ( kind = 4 ) n

  integer ( kind = 4 ) output_unit
  integer ( kind = 4 ) j
  character ( len = 30 ) string
  real ( kind = 8 ) table(m,n)
!
!  Create the format string.
!
  write ( string, '(a1,i6,a1,i6,a1,i6,a1)' ) '(', m, 'g', 14, '.', 6, ')'
  call s_blank_delete ( string )

  do j = 1, n
    write ( output_unit, string ) table(1:m,j)
  end do

  return
end
subroutine dtable_header_read ( input_filename, m, n )

!*****************************************************************************80
!
!! DTABLE_HEADER_READ reads header data from a file.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    05 October 2003
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) INPUT_FILENAME, the name of the input file.
!
!    Output, integer ( kind = 4 ) M, spatial dimension.
!
!    Output, integer ( kind = 4 ) N, the number of points.
!
  implicit none

  character ( len = * ) input_filename
  integer ( kind = 4 ) m
  integer ( kind = 4 ) n

  call file_column_count ( input_filename, m )

  if ( m <= 0 ) then
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'DTABLE_HEADER_READ - Fatal error!'
    write ( *, '(a)' ) '  There was some kind of I/O problem while trying'
    write ( *, '(a)' ) '  to count the number of data columns in'
    write ( *, '(a)' ) '  the file "' // trim ( input_filename ) // '".'
    stop
  end if

  call file_row_count ( input_filename, n )

  if ( n <= 0 ) then
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'DTABLE_HEADER_READ - Fatal error!'
    write ( *, '(a)' ) '  There was some kind of I/O problem while trying'
    write ( *, '(a)' ) '  to count the number of data rows in'
    write ( *, '(a)' ) '  the file "' // trim ( input_filename ) // '".'
    stop
  end if

  return
end
subroutine dtable_header_write ( output_filename, output_unit, m, n )

!*****************************************************************************80
!
!! DTABLE_HEADER_WRITE writes the table header data to a file.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    01 October 2003
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) OUTPUT_FILENAME, the output filename.
!
!    Input, integer ( kind = 4 ) OUTPUT_UNIT, the output unit.
!
!    Input, integer ( kind = 4 ) M, the spatial dimension.
!
!    Input, integer ( kind = 4 ) N, the number of points.
!
  implicit none

  integer ( kind = 4 ) m
  integer ( kind = 4 ) n
  character ( len = * ) output_filename
  integer ( kind = 4 ) output_unit
  character ( len = 40 ) string

  write ( output_unit, '(a)' )    '#  ' // trim ( output_filename )
  write ( output_unit, '(a)' )    '#  created by TABLE_IO.F90'
  write ( output_unit, '(a)' )    '#'
  write ( output_unit, '(a,i3)' ) '#  Spatial dimension M = ', m
  write ( output_unit, '(a,i6)' ) '#  Number of points N = ', n
  write ( output_unit, '(a)' )    '#'

  return
end
subroutine find_closest ( m, n, x, generator, nearest )

!*****************************************************************************80
!
!! FIND_CLOSEST finds the Voronoi cell generator closest to a point X.
!
!  Discussion:
!
!    This routine finds the closest Voronoi cell generator by checking every
!    one.  For problems with many cells, this process can take the bulk
!    of the CPU time.  Other approaches, which group the cell generators into
!    bins, can run faster by a large factor.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    03 September 2001
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, integer ( kind = 4 ) M, the spatial dimension.
!
!    Input, integer ( kind = 4 ) N, the number of cell generators.
!
!    Input, real ( kind = 8 ) X(M), the point to be checked.
!
!    Input, real ( kind = 8 ) GENERATOR(M,N), the cell generators.
!
!    Output, integer ( kind = 4 ) NEAREST, the index of the nearest 
!    cell generators.
!
  implicit none

  integer ( kind = 4 ) m
  integer ( kind = 4 ) n

  real ( kind = 8 ) generator(m,n)
  real ( kind = 8 ) distance
  real ( kind = 8 ) dist_sq
  integer ( kind = 4 ) i
  integer ( kind = 4 ) nearest
  real ( kind = 8 ) x(m)

  nearest = 0
  distance = huge ( distance )

  do i = 1, n

    dist_sq = sum ( ( generator(1:m,i) - x(1:m) )**2 )

    dist_sq = sqrt ( dist_sq )

    if ( dist_sq < distance ) then
      distance = dist_sq
      nearest = i
    end if

  end do

  return
end
subroutine file_column_count ( input_filename, column_num )

!*****************************************************************************80
!
!! FILE_COLUMN_COUNT counts the number of columns in the first line of a file.
!
!  Discussion:
!
!    The file is assumed to be a simple text file.
!
!    Most lines of the file is presumed to consist of COLUMN_NUM words,
!    separated by spaces.  There may also be some blank lines, and some
!    comment lines,
!    which have a "#" in column 1.
!
!    The routine tries to find the first non-comment non-blank line and
!    counts the number of words in that line.
!
!    If all lines are blanks or comments, it goes back and tries to analyze
!    a comment line.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    21 June 2001
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) INPUT_FILENAME, the name of the file.
!
!    Output, integer ( kind = 4 ) COLUMN_NUM, the number of columns in the file.
!
  implicit none

  integer ( kind = 4 ) column_num
  logical got_one
  character ( len = * ) input_filename
  integer ( kind = 4 ) input_unit
  integer ( kind = 4 ) ios
  character ( len = 255 ) line
!
!  Open the file.
!
  call get_unit ( input_unit )

  open ( unit = input_unit, file = input_filename, status = 'old', &
    form = 'formatted', access = 'sequential', iostat = ios )

  if ( ios /= 0 ) then
    column_num = -1
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'FILE_COLUMN_COUNT - Fatal error!'
    write ( *, '(a)' ) '  Could not open the file:'
    write ( *, '(a)' ) '    ' // trim ( input_filename )
    return
  end if
!
!  Read one line, but skip blank lines and comment lines.
!
  got_one = .false.

  do

    read ( input_unit, '(a)', iostat = ios ) line

    if ( ios /= 0 ) then
      exit
    end if

    if ( len_trim ( line ) == 0 ) then
      cycle
    end if

    if ( line(1:1) == '#' ) then
      cycle
    end if

    got_one = .true.
    exit

  end do

  if ( .not. got_one ) then

    rewind ( input_unit )

    do

      read ( input_unit, '(a)', iostat = ios ) line

      if ( ios /= 0 ) then
        exit
      end if

      if ( len_trim ( line ) == 0 ) then
        cycle
      end if

      got_one = .true.
      exit

    end do

  end if

  close ( unit = input_unit )

  if ( .not. got_one ) then
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'FILE_COLUMN_COUNT - Warning!'
    write ( *, '(a)' ) '  The file does not seem to contain any data.'
    column_num = -1
    return
  end if

  call s_word_count ( line, column_num )

  return
end
subroutine file_row_count ( input_filename, row_num )

!*****************************************************************************80
!
!! FILE_ROW_COUNT counts the number of row records in a file.
!
!  Discussion:
!
!    It does not count lines that are blank, or that begin with a
!    comment symbol '#'.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    06 March 2003
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) INPUT_FILENAME, the name of the input file.
!
!    Output, integer ( kind = 4 ) ROW_NUM, the number of rows found.
!
  implicit none

  integer ( kind = 4 ) bad_num
  integer ( kind = 4 ) comment_num
  integer ( kind = 4 ) ierror
  character ( len = * ) input_filename
  integer ( kind = 4 ) input_unit
  integer ( kind = 4 ) ios
  character ( len = 255 ) line
  integer ( kind = 4 ) record_num
  integer ( kind = 4 ) row_num

  call get_unit ( input_unit )

  open ( unit = input_unit, file = input_filename, status = 'old', &
    iostat = ios )

  if ( ios /= 0 ) then
    row_num = -1;
    ierror = 1
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'FILE_ROW_COUNT - Fatal error!'
    write ( *, '(a)' ) '  Could not open the input file: ' // &
      trim ( input_filename )
    stop
  end if

  comment_num = 0
  row_num = 0
  record_num = 0
  bad_num = 0

  do

    read ( input_unit, '(a)', iostat = ios ) line

    if ( ios /= 0 ) then
      ierror = record_num
      exit
    end if

    record_num = record_num + 1

    if ( line(1:1) == '#' ) then
      comment_num = comment_num + 1
      cycle
    end if

    if ( len_trim ( line ) == 0 ) then
      comment_num = comment_num + 1
      cycle
    end if

    row_num = row_num + 1

  end do

  close ( unit = input_unit )

  return
end
subroutine get_unit ( iunit )

!*****************************************************************************80
!
!! GET_UNIT returns a free FORTRAN unit number.
!
!  Discussion:
!
!    A "free" FORTRAN unit number is an integer between 1 and 99 which
!    is not currently associated with an I/O device.  A free FORTRAN unit
!    number is needed in order to open a file with the OPEN command.
!
!    If IUNIT = 0, then no free FORTRAN unit could be found, although
!    all 99 units were checked (except for units 5, 6 and 9, which
!    are commonly reserved for console I/O).
!
!    Otherwise, IUNIT is an integer between 1 and 99, representing a
!    free FORTRAN unit.  Note that GET_UNIT assumes that units 5 and 6
!    are special, and will never return those values.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    18 September 2005
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Output, integer ( kind = 4 ) IUNIT, the free unit number.
!
  implicit none

  integer ( kind = 4 ) i
  integer ( kind = 4 ) ios
  integer ( kind = 4 ) iunit
  logical lopen

  iunit = 0

  do i = 1, 99

    if ( i /= 5 .and. i /= 6 .and. i /= 9 ) then

      inquire ( unit = i, opened = lopen, iostat = ios )

      if ( ios == 0 ) then
        if ( .not. lopen ) then
          iunit = i
          return
        end if
      end if

    end if

  end do

  return
end
function r8_uniform_01 ( seed )

!*****************************************************************************80
!
!! R8_UNIFORM_01 returns a unit pseudorandom R8.
!
!  Discussion:
!
!    An R8 is a real ( kind = 8 ) value.
!
!    This routine implements the recursion
!
!      seed = 16807 * seed mod ( 2^31 - 1 )
!      r8_uniform_01 = seed / ( 2^31 - 1 )
!
!    The integer arithmetic never requires more than 32 bits,
!    including a sign bit.
!
!    If the initial seed is 12345, then the first three computations are
!
!      Input     Output      R8_UNIFORM_01
!      SEED      SEED
!
!         12345   207482415  0.096616
!     207482415  1790989824  0.833995
!    1790989824  2035175616  0.947702
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    05 July 2006
!
!  Author:
!
!    John Burkardt
!
!  Reference:
!
!    Paul Bratley, Bennett Fox, Linus Schrage,
!    A Guide to Simulation,
!    Springer Verlag, pages 201-202, 1983.
!
!    Pierre L'Ecuyer,
!    Random Number Generation,
!    in Handbook of Simulation,
!    edited by Jerry Banks,
!    Wiley Interscience, page 95, 1998.
!
!    Bennett Fox,
!    Algorithm 647:
!    Implementation and Relative Efficiency of Quasirandom
!    Sequence Generators,
!    ACM Transactions on Mathematical Software,
!    Volume 12, Number 4, pages 362-376, 1986.
!
!    Peter Lewis, Allen Goodman, James Miller
!    A Pseudo-Random Number Generator for the System/360,
!    IBM Systems Journal,
!    Volume 8, pages 136-143, 1969.
!
!  Parameters:
!
!    Input/output, integer ( kind = 4 ) SEED, the "seed" value, which should
!    NOT be 0. On output, SEED has been updated.
!
!    Output, real ( kind = 8 ) R8_UNIFORM_01, a new pseudorandom variate,
!    strictly between 0 and 1.
!
  implicit none

  integer ( kind = 4 ) k
  real ( kind = 8 ) r8_uniform_01
  integer ( kind = 4 ) seed

  if ( seed == 0 ) then
    write ( *, '(a)' ) ' '
    write ( *, '(a)' ) 'R8_UNIFORM_01 - Fatal error!'
    write ( *, '(a)' ) '  Input value of SEED = 0.'
    stop
  end if

  k = seed / 127773

  seed = 16807 * ( seed - k * 127773 ) - k * 2836

  if ( seed < 0 ) then
    seed = seed + 2147483647
  end if
!
!  Although SEED can be represented exactly as a 32 bit integer,
!  it generally cannot be represented exactly as a 32 bit real number!
!
  r8_uniform_01 = real ( seed, kind = 8 ) * 4.656612875D-10

  return
end
subroutine s_blank_delete ( s )

!*****************************************************************************80
!
!! S_BLANK_DELETE removes blanks from a string, left justifying the remainder.
!
!  Discussion:
!
!    All TAB characters are also removed.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    26 July 1998
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input/output, character ( len = * ) S, the string to be transformed.
!
  implicit none

  character c
  integer ( kind = 4 ) get
  integer ( kind = 4 ) put
  integer ( kind = 4 ) nchar
  character ( len = * ) s
  character, parameter :: TAB = char ( 9 )

  put = 0
  nchar = len_trim ( s )

  do get = 1, nchar

    c = s(get:get)

    if ( c /= ' ' .and. c /= TAB ) then
      put = put + 1
      s(put:put) = c
    end if

  end do

  s(put+1:nchar) = ' '

  return
end
subroutine s_to_r8 ( s, r, ierror, lchar )

!*****************************************************************************80
!
!! S_TO_R8 reads an R8 from a string.
!
!  Discussion:
!
!    This routine will read as many characters as possible until it reaches
!    the end of the string, or encounters a character which cannot be
!    part of the real number.
!
!    Legal input is:
!
!       1 blanks,
!       2 '+' or '-' sign,
!       2.5 spaces
!       3 integer part,
!       4 decimal point,
!       5 fraction part,
!       6 'E' or 'e' or 'D' or 'd', exponent marker,
!       7 exponent sign,
!       8 exponent integer part,
!       9 exponent decimal point,
!      10 exponent fraction part,
!      11 blanks,
!      12 final comma or semicolon.
!
!    with most quantities optional.
!
!  Example:
!
!    S                 R
!
!    '1'               1.0
!    '     1   '       1.0
!    '1A'              1.0
!    '12,34,56'        12.0
!    '  34 7'          34.0
!    '-1E2ABCD'        -100.0
!    '-1X2ABCD'        -1.0
!    ' 2E-1'           0.2
!    '23.45'           23.45
!    '-4.2E+2'         -420.0
!    '17d2'            1700.0
!    '-14e-2'         -0.14
!    'e2'              100.0
!    '-12.73e-9.23'   -12.73 * 10.0^(-9.23)
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    12 February 2001
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) S, the string containing the
!    data to be read.  Reading will begin at position 1 and
!    terminate at the end of the string, or when no more
!    characters can be read to form a legal real.  Blanks,
!    commas, or other nonnumeric data will, in particular,
!    cause the conversion to halt.
!
!    Output, real ( kind = 8 ) R, the real value that was read from the string.
!
!    Output, integer ( kind = 4 ) IERROR, error flag.
!    0, no errors occurred.
!    1, 2, 6 or 7, the input number was garbled.  The
!    value of IERROR is the last type of input successfully
!    read.  For instance, 1 means initial blanks, 2 means
!    a plus or minus sign, and so on.
!
!    Output, integer LCHAR, the number of characters read from
!    the string to form the number, including any terminating
!    characters such as a trailing comma or blanks.
!
  implicit none

  logical ch_eqi
  character c
  integer ( kind = 4 ) ierror
  integer ( kind = 4 ) ihave
  integer ( kind = 4 ) isgn
  integer ( kind = 4 ) iterm
  integer ( kind = 4 ) jbot
  integer ( kind = 4 ) jsgn
  integer ( kind = 4 ) jtop
  integer ( kind = 4 ) lchar
  integer ( kind = 4 ) nchar
  integer ( kind = 4 ) ndig
  real ( kind = 8 ) r
  real ( kind = 8 ) rbot
  real ( kind = 8 ) rexp
  real ( kind = 8 ) rtop
  character ( len = * ) s
  character, parameter :: TAB = char ( 9 )

  nchar = len_trim ( s )
  ierror = 0
  r = 0.0D+00
  lchar = - 1
  isgn = 1
  rtop = 0.0D+00
  rbot = 1.0D+00
  jsgn = 1
  jtop = 0
  jbot = 1
  ihave = 1
  iterm = 0

  do

    lchar = lchar + 1
    c = s(lchar+1:lchar+1)
!
!  Blank or TAB character.
!
    if ( c == ' ' .or. c == TAB ) then

      if ( ihave == 2 ) then

      else if ( ihave == 6 .or. ihave == 7 ) then
        iterm = 1
      else if ( 1 < ihave ) then
        ihave = 11
      end if
!
!  Comma.
!
    else if ( c == ',' .or. c == ';' ) then

      if ( ihave /= 1 ) then
        iterm = 1
        ihave = 12
        lchar = lchar + 1
      end if
!
!  Minus sign.
!
    else if ( c == '-' ) then

      if ( ihave == 1 ) then
        ihave = 2
        isgn = - 1
      else if ( ihave == 6 ) then
        ihave = 7
        jsgn = - 1
      else
        iterm = 1
      end if
!
!  Plus sign.
!
    else if ( c == '+' ) then

      if ( ihave == 1 ) then
        ihave = 2
      else if ( ihave == 6 ) then
        ihave = 7
      else
        iterm = 1
      end if
!
!  Decimal point.
!
    else if ( c == '.' ) then

      if ( ihave < 4 ) then
        ihave = 4
      else if ( 6 <= ihave .and. ihave <= 8 ) then
        ihave = 9
      else
        iterm = 1
      end if
!
!  Exponent marker.
!
    else if ( ch_eqi ( c, 'E' ) .or. ch_eqi ( c, 'D' ) ) then

      if ( ihave < 6 ) then
        ihave = 6
      else
        iterm = 1
      end if
!
!  Digit.
!
    else if ( ihave < 11 .and. lge ( c, '0' ) .and. lle ( c, '9' ) ) then

      if ( ihave <= 2 ) then
        ihave = 3
      else if ( ihave == 4 ) then
        ihave = 5
      else if ( ihave == 6 .or. ihave == 7 ) then
        ihave = 8
      else if ( ihave == 9 ) then
        ihave = 10
      end if

      call ch_to_digit ( c, ndig )

      if ( ihave == 3 ) then
        rtop = 10.0D+00 * rtop + real ( ndig, kind = 8 )
      else if ( ihave == 5 ) then
        rtop = 10.0D+00 * rtop + real ( ndig, kind = 8 )
        rbot = 10.0D+00 * rbot
      else if ( ihave == 8 ) then
        jtop = 10 * jtop + ndig
      else if ( ihave == 10 ) then
        jtop = 10 * jtop + ndig
        jbot = 10 * jbot
      end if
!
!  Anything else is regarded as a terminator.
!
    else
      iterm = 1
    end if
!
!  If we haven't seen a terminator, and we haven't examined the
!  entire string, go get the next character.
!
    if ( iterm == 1 .or. nchar <= lchar+1 ) then
      exit
    end if

  end do
!
!  If we haven't seen a terminator, and we have examined the
!  entire string, then we're done, and LCHAR is equal to NCHAR.
!
  if ( iterm /= 1 .and. lchar+1 == nchar ) then
    lchar = nchar
  end if
!
!  Number seems to have terminated.  Have we got a legal number?
!  Not if we terminated in states 1, 2, 6 or 7!
!
  if ( ihave == 1 .or. ihave == 2 .or. ihave == 6 .or. ihave == 7 ) then

    ierror = ihave

    return
  end if
!
!  Number seems OK.  Form it.
!
  if ( jtop == 0 ) then
    rexp = 1.0D+00
  else

    if ( jbot == 1 ) then
      rexp = 10.0D+00**( jsgn * jtop )
    else
      rexp = jsgn * jtop
      rexp = rexp / jbot
      rexp = 10.0D+00**rexp
    end if

  end if

  r = isgn * rexp * rtop / rbot

  return
end
subroutine s_to_r8vec ( s, n, rvec, ierror )

!*****************************************************************************80
!
!! S_TO_R8VEC reads an R8VEC from a string.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    19 February 2001
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) S, the string to be read.
!
!    Input, integer ( kind = 4 ) N, the number of values expected.
!
!    Output, real ( kind = 8 ) RVEC(N), the values read from the string.
!
!    Output, integer ( kind = 4 ) IERROR, error flag.
!    0, no errors occurred.
!    -K, could not read data for entries -K through N.
!
  implicit none

  integer ( kind = 4 ) n

  integer ( kind = 4 ) i
  integer ( kind = 4 ) ierror
  integer ( kind = 4 ) ilo
  integer ( kind = 4 ) lchar
  real ( kind = 8 ) rvec(n)
  character ( len = * ) s

  i = 0

  ilo = 1

  do while ( i < n )

    i = i + 1

    call s_to_r8 ( s(ilo:), rvec(i), ierror, lchar )

    if ( ierror /= 0 ) then
      ierror = -i
      exit
    end if

    ilo = ilo + lchar

  end do

  return
end
subroutine s_word_count ( s, nword )

!*****************************************************************************80
!
!! S_WORD_COUNT counts the number of "words" in a string.
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license. 
!
!  Modified:
!
!    14 April 1999
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    Input, character ( len = * ) S, the string to be examined.
!
!    Output, integer ( kind = 4 ) NWORD, the number of "words" in the string.
!    Words are presumed to be separated by one or more blanks.
!
  implicit none

  logical blank
  integer ( kind = 4 ) i
  integer ( kind = 4 ) lens
  integer ( kind = 4 ) nword
  character ( len = * ) s

  nword = 0
  lens = len ( s )

  if ( lens <= 0 ) then
    return
  end if

  blank = .true.

  do i = 1, lens

    if ( s(i:i) == ' ' ) then
      blank = .true.
    else if ( blank ) then
      nword = nword + 1
      blank = .false.
    end if

  end do

  return
end
subroutine timestamp ( )

!*****************************************************************************80
!
!! TIMESTAMP prints the current YMDHMS date as a time stamp.
!
!  Example:
!
!    31 May 2001   9:45:54.872 AM
!
!  Licensing:
!
!    This code is distributed under the GNU LGPL license.
!
!  Modified:
!
!    18 May 2013
!
!  Author:
!
!    John Burkardt
!
!  Parameters:
!
!    None
!
  implicit none

  character ( len = 8 ) ampm
  integer ( kind = 4 ) d
  integer ( kind = 4 ) h
  integer ( kind = 4 ) m
  integer ( kind = 4 ) mm
  character ( len = 9 ), parameter, dimension(12) :: month = (/ &
    'January  ', 'February ', 'March    ', 'April    ', &
    'May      ', 'June     ', 'July     ', 'August   ', &
    'September', 'October  ', 'November ', 'December ' /)
  integer ( kind = 4 ) n
  integer ( kind = 4 ) s
  integer ( kind = 4 ) values(8)
  integer ( kind = 4 ) y

  call date_and_time ( values = values )

  y = values(1)
  m = values(2)
  d = values(3)
  h = values(5)
  n = values(6)
  s = values(7)
  mm = values(8)

  if ( h < 12 ) then
    ampm = 'AM'
  else if ( h == 12 ) then
    if ( n == 0 .and. s == 0 ) then
      ampm = 'Noon'
    else
      ampm = 'PM'
    end if
  else
    h = h - 12
    if ( h < 12 ) then
      ampm = 'PM'
    else if ( h == 12 ) then
      if ( n == 0 .and. s == 0 ) then
        ampm = 'Midnight'
      else
        ampm = 'AM'
      end if
    end if
  end if

  write ( *, '(i2,1x,a,1x,i4,2x,i2,a1,i2.2,a1,i2.2,a1,i3.3,1x,a)' ) &
    d, trim ( month(m) ), y, h, ':', n, ':', s, '.', mm, trim ( ampm )

  return
end