>> matlabpool ( 'open', 'local', 4 ) Starting matlabpool using the 'local' configuration ... connected to 4 labs. >> run_opt ( 'zermelo', 16 ) Max Line search Directional First-order Iter F-count f(x) constraint steplength derivative optimality Procedure 0 17 -10 1 Infeasible start point 1 34 -16.13 0.9947 1 -6.5 5.13 2 51 -25.3004 0.5327 1 -4.55 2.83 3 68 -22.507 0.02845 1 3.58 0.664 4 85 -22.5414 0.005243 1 -0.496 0.109 5 103 -22.5317 0.002169 0.5 0.0108 0.029 6 120 -22.5195 -0.000132 1 0.194 0.025 7 137 -22.5208 4.565e-05 1 -0.0763 0.017 8 154 -22.5207 1.45e-05 1 -0.00328 0.0101 9 171 -22.5207 2.719e-06 1 -0.00739 0.00312 Hessian modified 10 188 -22.5207 4.4e-07 1 -0.00111 0.00222 Hessian modified 11 205 -22.5207 -2.791e-07 1 -0.00229 0.000549 Hessian modified 12 222 -22.5207 -5.896e-08 1 -0.00286 0.000505 Hessian modified Local minimum possible. Constraints satisfied. fmincon stopped because the predicted change in the objective function is less than the selected value of the function tolerance and constraints were satisfied to within the selected value of the constraint tolerance. Active inequalities (to within options.TolCon = 1e-06): lower upper ineqlin ineqnonlin 1 ans = -1.3360 -1.2962 -1.2418 -1.1610 -1.0331 -0.8110 -0.4041 0.1948 0.6882 0.9663 1.1213 1.2159 1.2783 1.3226 1.3555 1.3808 >> matlabpool close Sending a stop signal to all the labs ... stopped. >>